coryv4 Posted May 11, 2013 Report Posted May 11, 2013 set of 36mm taper bored lectrons for sale have no idea what they are set up for i bought them last year to run on alky but never got around to buying the right parts for them. make me an offer. i can tear them apart later and get the numbers off the needle seat and pj Quote
coryv4 Posted May 11, 2013 Author Report Posted May 11, 2013 i talked to packard when i bought them he said it sounds like they are set up for a 600cc or bigger snomo on gas, but wouldnt know without seeing them. Quote
m671054 Posted May 11, 2013 Report Posted May 11, 2013 600cc on 36mm carbs? doubt it. these will work up to about a 4mil stock cyl id guess. Quote
Finch Posted May 11, 2013 Report Posted May 11, 2013 i run 36s on my cub and they work great. wish i had some spare monies id buy these up Quote
coryv4 Posted May 11, 2013 Author Report Posted May 11, 2013 600cc on 36mm carbs? doubt it. these will work up to about a 4mil stock cyl id guess. they are 38 tapered to 36. my 700 came stock with 36mm carbs. Quote
coryv4 Posted May 11, 2013 Author Report Posted May 11, 2013 Yeah I bet you're right, Packard doesn't have a clue about the carbs he designed. no shit. ive seen 38mm carbs on 1000 twin sleds that ran fine. Quote
okbeast Posted May 11, 2013 Report Posted May 11, 2013 they are 38 tapered to 36. my 700 came stock with 36mm carbs. All Lectrons taper 2mm. The HV Lectrons taper 4mm. I believe that's what the guys at Lectron told me. Damn good price on these. Quote
coryv4 Posted May 11, 2013 Author Report Posted May 11, 2013 All Lectrons taper 2mm. The HV Lectrons taper 4mm. I believe that's what the guys at Lectron told me. Damn good price on these. maybe its a 38/34. says 38HV on it Quote
m671054 Posted May 11, 2013 Report Posted May 11, 2013 Lectrons are stamped on each half what size the casting was oe. i guess snowmo use smaller carbs than bikes do? As i said before a stamped 36 would feed smaller stroke motors. i might be interested if these are 38. post all the details on the if you can. What needle and seat? what number is actually on the sides of the bodies? can you measure the id on the intake side? Quote
m671054 Posted May 11, 2013 Report Posted May 11, 2013 Yeah I bet you're right, Packard doesn't have a clue about the carbs he designed. hey dipshit you should check your facts. packard did not design them. he modifys them and in my opinion is the go to source for parts and tuning advice.these do not appear to be packard modified carbs either.but the are possibly priced very good depending on internals Quote
okbeast Posted May 11, 2013 Report Posted May 11, 2013 maybe its a 38/34. says 38HV on it I think so. Not 100% sure though. It's been too long since I talked with them. Quote
375hp banshees Posted May 12, 2013 Report Posted May 12, 2013 http://www.lectronfuelsystems.com/carburetor/lectron_power_jet_high_velocity_carburetor_30mm-40mm.html Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.