10mil duner?

[bansheerider313]

well I still got a few months before I start the build.i just dont wanna spend 15k on a overheating horrible duner

[10milmike]

U can not dune a DM. The water jackets are small. That thing will over all the time in the dunes.

[locogato11283]

I've got three big DMs and they get hot quick. I think you're going to have issues trying to dune one. I say 10 Serval or Cub for duning.

 

 

- HMFIC

[bansheerider313]

alright,thanks for the insight.i think ill have my builder do a serval,possibly a cub.mabe both:D

[Badbar88]

Do both, which ever motor you don't go with give to me.

[bansheerider313]

Lmfao

[ban565]

I have a 10mil 75mil bore that I dune all day long with know problems. It works well on the drag stripe as well. stock trans

[n2otoofast4u]

well,the only 10mils out here are dms,so I figured that was what was needed.

 

Wheres "here"

[n2otoofast4u]

alright,thanks for the insight.i think ill have my builder do a serval,possibly a cub.mabe both:D

oh FFS.... Maybe both....... UNREAL

[bansheerider313]

2 engines,not 2 complete bikes.and lakeview,or

[ban565]

Call Twistercraft for the info. 1-503-663-7711.

[n2otoofast4u]

DMs in Lakeview?

[bansheerider313]

I only know 2 guys that even have banshees here.both are DMs

[bansheerider313]

I want to go to coos bay with them this summer,so have to have somethin to keep up

[camatv]

whats wrong with a 535 cheetah??   dosent overheat.  is a CP cylinder.  is well known.  has pv's so can make killer TQ  AND make a shit ton of overrev...  just need someone who understands PV's and dome design build you one.   

 

535 PV cylinder, forged 10mill crank, straight cut spring loaded hinson basket, HD clutch, TZ bearing on pto side, stock modded trans OR override ( if your just going to drag) v-force reeds OR modded stocker cr250, 38mm lectrons shear BB pipes and you have one bad ass motor.  dyna ignition, lightened stock flywheel or stock flywheel,  that motor built right would make 75ish + ft lbs of tq and roll on at around 7500rpm would hit 100hp , should climb to around 120ish on top, rev to 11,000 rpm all damn day and stay together, and not overheat...

 

 the more proper question after that would be what frame would you use to control it?