Jump to content

Recommended Posts

Posted

I've tried to use the calculator for the FAQ but get nervous as to what I put in.

 

Bike will be stock EXCEPT:

T6 pipes and silencers

 

Stock air box with proflow & K&N filter with 8 vents in the box, would also run the lid and snorkel.

 

Elevation: will be between 300-1500 feet or 101-362 meters

Temps: will be mostly around 20* Celsius OR 70* Fahrenheit

Humidity: can get pretty high

 

Thanks!

Posted

stock pilots ..  stock needle 3rd clip ...  280 mains ..

Thank you sir!

 

So, another question. In the winter when it gets down to around 40*F should i drop a size or go up a size. Or stay the same?

Posted

Thank you sir!

 

So, another question. In the winter when it gets down to around 40*F should i drop a size or go up a size. Or stay the same?

the 280 main MAY be a bit rich for 70 degrees...  may not have to change at all, but wouldnt hurt much to go to 290 in the winter

  • 2 weeks later...
Posted

Two more questions.

 

If I wanna ride with temps around 4C or 40F should I just up my main to a 290?

 

Going to bump timing up +4 when my stater plate comes, does it need a Re-Jet for that mod?

 

Thanks!

Posted
I've tried to use the calculator for the FAQ but get nervous as to what I put in.

Bike will be stock EXCEPT:

T6 pipes and silencers

Stock air box with proflow & K&N filter with 8 vents in the box, would also run the lid and snorkel.

Elevation: will be between 300-1500 feet or 101-362 meters

Temps: will be mostly around 20* Celsius OR 70* Fahrenheit

Humidity: can get pretty high

Thanks!

 

 

Where is the calculator for the FAQ?

 

 

Sent from my iPad using Tapatalk HD

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...