Best Way to cut fenders?

[Anthony133]

I have a really ugly, gay, sagging set of purple plactics that i want to fully race cut and have painted/ airbrushed or whatever will last. Ive never cut fenders so how do i do it? I was going to measure and mark dots to kinda guide myself so both sides are equal but my main questions is what do i cut them with? What is the easiest, fasted and best way to do this? I have razor blades and stanly knifes, will those work?

[vulvafan537240]

tape them off and mark em and use a jigsaw, hot knife, cutoff wheel etc

[possum]

use tape to mask off the lines then get a cutoff wheel and u can get a perfect straight line easier. jigsaw is second best. but cant really get in tight if u need to.

[#1JUANstunna]

Chainsaw

[Nightmare]

Your teeth:lol: Band saw works good.

 

Sent from my SGH-T679 using Tapatalk 2

 

 

[Hibnecker1]

i used a sawsall to get them trimmed down then a sanding drum on a drill to smooth them out and finished with a buffing wheel... looked good till i got new plastics

[dirtydownunder]

best way to cut them, is off.

[lms1977]

I used a sawzal and then sanded them smooth and shaped them

 

[wfobasheeboy]

tape them off and mark em and use a jigsaw, hot knife, cutoff wheel etc

X2^^^

I taped them and used a box cuter with a new blade for each fender. Then sanded with scotch-brite pad.

 

[Glenyboy]

[fappy'97]

I've always used just a utility knife, and then sand down until the angle and finish is how you want. After that I always take a heatgun or torch to make it glossy...

[Buckwheat]

Chainsaw

You beat me too it!

[tecate3matt]

Rusty axe... MERICA. I used a dremel tool with cut off wheel. Then sanded the edges back.

[Sandking]

Jigsaw then beltsander quick and easy

[t3h hott!]

nooo dont cut them! trade them i have race cut black plastics...