Okiepred Posted July 1, 2012 Report Posted July 1, 2012 What's the biggest you can bore stock cylinders to? I have a set that is 66mm now but need bored! Will I have to have them resleeved or can they go bigger? Quote
tz racin Posted July 1, 2012 Report Posted July 1, 2012 What's the biggest you can bore stock cylinders to? I have a set that is 66mm now but need bored! Will I have to have them resleeved or can they go bigger? 66.50 is as far as i would ever take em , i think they would b time bombs if ya tried to go any bigger just my view Quote
DirtDiggler69 Posted July 1, 2012 Report Posted July 1, 2012 66.5 is the biggest , you can have them resleeved , but it's sometimes cheaper to just find a good set of stockers. Resleeving and then porting to match the sleeves to your jugs can get spendy , Banshee's horsepower is measured in Cubic Dollars . Quote
Surfrjag Posted July 1, 2012 Report Posted July 1, 2012 i have seen some bored off center that wont even go that far.. Quote
trickedcarbine Posted July 2, 2012 Report Posted July 2, 2012 66.5 is the biggest , you can have them resleeved , but it's sometimes cheaper to just find a good set of stockers. Resleeving and then porting to match the sleeves to your jugs can get spendy , Banshee's horsepower is measured in Cubic Dollars . Ha! Fuckin' aye. That is the best way I have ever heard it put when it comes to performance and price on banshees. Quote
Wildcardracing Posted July 2, 2012 Report Posted July 2, 2012 It is very rare to have a set that will "safely" go to 66.5. I usually consider 66 the last bore. -Brandon Quote
Jereme6655 Posted July 3, 2012 Report Posted July 3, 2012 Listen to Brandon....while they do sell pistons all the way up to 66.50......the safe point is what Brandon said.... 66.00 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.