Koba Posted May 24, 2012 Report Posted May 24, 2012 So i can never get my bike started without a pull start.. i kick it till its flooded and nothing... But after a pull start she runs spot on, im not to sure y i cant get her started. Ive got spark and fuel. She will fire up first kick after i get her going from a push start. If it makes a difference i have 280 mains pretty sure stock everything else. Quote
bluebanshee98 Posted May 24, 2012 Report Posted May 24, 2012 why arnt u running stock jetting if everything is stock? check to make sure the correct carb bowls are on the correct carb. make sure choke tube i connected good between both carbs. also low compression can be a factor in hard starting Quote
LawDog Posted May 24, 2012 Report Posted May 24, 2012 mine did that to after i rebuilt the carbs and put bigger jets in "to big of jets" i then went down to jet sizes and it ran perfect Quote
2strokes4u Posted May 24, 2012 Report Posted May 24, 2012 Compression test. Same thing happened to me and rings were shot. After top end rebuild, one kick and she fired right up Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.