bansheemandan Posted June 4, 2011 Report Share Posted June 4, 2011 (edited) i lost my job so my toy has to go $4000 2000 yamaha banshee, completely rebuilt from the ground up, has about 7 hours on it since built, very fast, i have clean clear title in my name, everything is new or rebuilt motor k&t ported (drag port) 4mm stroker crank wiseco stroker pistons shearer inframe drag pipes pro design cool head with 20cc domes (pump gas) reed spacers boost bottle v force 2's 34mm keihin carbs upp intakes upp carb to air box adapters pro design pro flow air filter adapter k&n air filter air filter outter wear new shift forks wiseco clutch basket barrnet clutch pro design water pump impeller pro design adjustable timing plate all new bearings-seals-gaskets case saver powder coated cases (candy blue) chassis laeger pro trax +2 +1 a arms works triple rate shocks with rezzies g force chrome extended axle billet tie rods billet axle carrier everything powder coated--frame-aarms-swing arm-steering stem-hubs-brake pedal full chassis polished nut and bolt kit 5.5 ims gas tank 909 handle bars braided brake lines rpm bumper rpm grab bar rpm swing arm skid plate rpm full chassis skid plate foot peg kick ups shock covers itp ss rims rear tires (pure sport realtor) front tires (pure sport bandits) new front and rear brakes new chain and sprockets msr levers all new chassis and suspension bearings clutch cable throttle cable polished aluminum (dress up) tail light cover stator cover clutch cover clutch cover insert warter pump cover radiator cover master cylinder cover billet thumb throttle assm. nut and bolt kit gas cap cylinders cool head reed spacers handle bar clamp levers e brake block off tie rods Edited June 4, 2011 by bansheemandan Quote Link to comment Share on other sites More sharing options...
bansheemandan Posted June 4, 2011 Author Report Share Posted June 4, 2011 (edited) Edited June 4, 2011 by bansheemandan Quote Link to comment Share on other sites More sharing options...
BansheeBoy347 Posted June 4, 2011 Report Share Posted June 4, 2011 i lost my job so my toy has to go $4000 2000 yamaha banshee, completely rebuilt from the ground up, has about 7 hours on it since built, very fast, i have clean clear title in my name, everything is new or rebuilt motor k&t ported (drag port) 4mm stroker crank wiseco stroker pistons shearer inframe drag pipes pro design cool head with 20cc domes (pump gas) reed spacers boost bottle v force 2's 34mm keihin carbs upp intakes upp carb to air box adapters pro design pro flow air filter adapter k&n air filter air filter outter wear new shift forks wiseco clutch basket barrnet clutch pro design water pump impeller pro design adjustable timing plate all new bearings-seals-gaskets case saver powder coated cases (candy blue) chassis laeger pro trax +2 +1 a arms works triple rate shocks with rezzies g force chrome extended axle billet tie rods billet axle carrier everything powder coated--frame-aarms-swing arm-steering stem-hubs-brake pedal full chassis polished nut and bolt kit 5.5 ims gas tank 909 handle bars braided brake lines rpm bumper rpm grab bar rpm swing arm skid plate rpm full chassis skid plate foot peg kick ups shock covers itp ss rims rear tires (pure sport realtor) front tires (pure sport bandits) new front and rear brakes new chain and sprockets msr levers all new chassis and suspension bearings clutch cable throttle cable polished aluminum (dress up) tail light cover stator cover clutch cover clutch cover insert warter pump cover radiator cover master cylinder cover billet thumb throttle assm. nut and bolt kit gas cap cylinders cool head reed spacers handle bar clamp levers e brake block off tie rods Where did you get that sticker on the back? I have to get one now. Quote Link to comment Share on other sites More sharing options...
bansheemandan Posted June 4, 2011 Author Report Share Posted June 4, 2011 Where did you get that sticker on the back? I have to get one now. i made it, i do all kinds of stickers-decals Quote Link to comment Share on other sites More sharing options...
MarineNYC Posted June 5, 2011 Report Share Posted June 5, 2011 sorry no way in hell. you would never get 4000 for that. sorry for sound like a asshole. just stating the facts. it has some decent parts on it. you might do better with a part out. Quote Link to comment Share on other sites More sharing options...
Smokestack Posted June 5, 2011 Report Share Posted June 5, 2011 <br />sorry no way in hell. you would never get 4000 for that. sorry for sound like a asshole. just stating the facts. it has some decent parts on it. you might do better with a part out.<br /><br /><br /><br /> Maybe with alot of cleaning and polishing? Quote Link to comment Share on other sites More sharing options...
midlifecrisis Posted June 6, 2011 Report Share Posted June 6, 2011 If you part it, dibs on the stator cover? Quote Link to comment Share on other sites More sharing options...
Infamous039 Posted June 6, 2011 Report Share Posted June 6, 2011 Yes $4k is a bit much, I picked up my 06 for way less than that with more parts on it and papers. I would part it out so you can get more cash out of the bike honestly. Quote Link to comment Share on other sites More sharing options...
mcgee racing Posted June 20, 2011 Report Share Posted June 20, 2011 (edited) free bump because if you want to part out i want them drag pipe if there small bore anyone selling some CPI's got lots of stuff to trade Edited June 20, 2011 by mcgee racing Quote Link to comment Share on other sites More sharing options...
4MiLLDraGSheE Posted June 20, 2011 Report Share Posted June 20, 2011 I dont think thats too much to ask its got everything even powdered cased try doin thst for less than 4 grand. Quote Link to comment Share on other sites More sharing options...
Nieskes Posted June 20, 2011 Report Share Posted June 20, 2011 part it out Quote Link to comment Share on other sites More sharing options...
Wicked2Stroke Posted June 20, 2011 Report Share Posted June 20, 2011 I think that's a fair price, I'm in the Dallas area and you are going to have to spend $2500 just to get something in decent shape, I'd pay $4k for that in a heartbeat before I bought a yfz or raptor for the same price Quote Link to comment Share on other sites More sharing options...
msc4 Posted June 21, 2011 Report Share Posted June 21, 2011 part it out! you will be able to sell it all on here forsure! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.