badassbanshee479 Posted November 14, 2010 Report Share Posted November 14, 2010 bump for a good deal and an awesome dealer! Quote Link to comment Share on other sites More sharing options...
bansheesa Posted November 16, 2010 Report Share Posted November 16, 2010 Hi Jeff. Do you guys do a 7mm kit? Kit consisting of: Barrels, Head, Special cut domes, pistons, plugs, stud extenders and gaskets. Would you recommend larger carbs and high flow pipes for these? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted November 16, 2010 Report Share Posted November 16, 2010 Not trying to steal Jeff's thunder, but they don't offer this cylinder cast for a 7mm crank, at this time it's stock stroke and 4mm only. That being said, that's up to Jeffro if he/you wanted to port the 4mm version to work with the 7 mil. Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted November 16, 2010 Author Report Share Posted November 16, 2010 Calvin says they will not offer the Serval in anything but stock stroke and 4mm stroke. Just wont be much demand for a 7mm Serval when the Cubs do so well. The Serval is a bolt on kit to help fill the void for Duners/Play bikes who dont want light switch (as some refer to as Cub powerband) power without going full Race Cub. Quote Link to comment Share on other sites More sharing options...
renoyfzfan Posted November 16, 2010 Report Share Posted November 16, 2010 if your looking for some stock appearing cyl. in the 7-10 stroke get the wompus cyl. i think they go up to 72bore Quote Link to comment Share on other sites More sharing options...
jay shafer Posted November 17, 2010 Report Share Posted November 17, 2010 if your looking for some stock appearing cyl. in the 7-10 stroke get the wompus cyl. i think they go up to 72bore where can u get the wompus cylinder??? is that cylinder already available? Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted November 23, 2010 Author Report Share Posted November 23, 2010 Wampus 4mm and 10mm will be available within a week or so. They will also be available with the 4mm serval port layout soon. The 7mm will be down the road a bit. We or any CP ind. dealer can get them for you. The Wampus is available in 68mm and 72mm bore. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted November 23, 2010 Report Share Posted November 23, 2010 Jeffro.... Details on the cylinder head being used for the 72mm bore? Quote Link to comment Share on other sites More sharing options...
2strokespirit Posted November 23, 2010 Report Share Posted November 23, 2010 (edited) Will the Wampus be in 7mm with the Serval's port timings?? Then I will rather wait for them if so.... Any idea on pricing yet, or any more info will be appreciated? I understand this will be a stock look alike cylinder, but what else? Thanks Edited November 23, 2010 by 2strokespirit Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted November 23, 2010 Author Report Share Posted November 23, 2010 The 72mm Wampus will use the Supercub head/domes OR soon Calvin is working on a stock head look alike with Supercub layout. Yes the Wampus cyl. will be available in a 7mm Serval layout but it will be about a month or so. Retail pricing on the Wampus is $1,075 plated. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted November 23, 2010 Report Share Posted November 23, 2010 OR soon Calvin is working on a stock head look alike with Supercub layout. That's what I was wanting to know...or hoping should I say. Thanks!!! Quote Link to comment Share on other sites More sharing options...
RZBansheeMan Posted November 23, 2010 Report Share Posted November 23, 2010 Soo, what you are saying is, the wompus will have the same port layout as the servals ..triple transfer - triple exhaust - bridged intake with the mellow timings of the serval and will appear completely stock on the outside ??? Quote Link to comment Share on other sites More sharing options...
too_fazt Posted November 23, 2010 Report Share Posted November 23, 2010 yup thats what hes saying...the only difference so far is that its one piece like the cubs. itll be interesting to see how close they look like stock. is that price tag for only cylinders plated? they must be Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted November 23, 2010 Report Share Posted November 23, 2010 10mm coolant bolt and all ? they should be called the cheeky cub haha Quote Link to comment Share on other sites More sharing options...
jay shafer Posted November 24, 2010 Report Share Posted November 24, 2010 damn i see we about to have a whole lot of options for the banshees........i wonder what kind of power will the 10mm wompus be making......any estimates guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.