f00pda3w00p Posted August 2, 2010 Report Posted August 2, 2010 http://cgi.ebay.com/ebaymotors/06-CUSTOM-BANSHEE-W-GSXR-1000-MOTOR-CHROME-SHIP-_W0QQcmdZViewItemQQhashZitem335f818493QQitemZ220645655699QQptZATVs Quote
Kev55 Posted August 2, 2010 Report Posted August 2, 2010 thats bad ass! i wonder what the reserve is set at. Quote
06specialedition Posted August 3, 2010 Report Posted August 3, 2010 I'd like to ride that thing Quote
shanYE west Posted August 3, 2010 Report Posted August 3, 2010 anytime i see a street bike conversion with a banshee.. I cringe.. Quote
Valin Posted August 3, 2010 Report Posted August 3, 2010 anytime i see a street bike conversion with a banshee.. I cringe.. Agreed, but, I do have to admit that this is probably the nicest looking conversion I have seen. Quote
shanYE west Posted August 3, 2010 Report Posted August 3, 2010 Agreed, but, I do have to admit that this is probably the nicest looking conversion I have seen. I dont like how its using the OEM tank.. too big and bulky. The better conversions I've seen use raptor and YFZ chassis's. You have to cut the upper rail to fit the motor.. and it always looks cheezy when you have to cut the frame to fit. Just my opinion on it. Quote
oreilys Posted August 4, 2010 Report Posted August 4, 2010 I dont like how its using the OEM tank.. too big and bulky. The better conversions I've seen use raptor and YFZ chassis's. You have to cut the upper rail to fit the motor.. and it always looks cheezy when you have to cut the frame to fit. Just my opinion on it. That guy is a fucking clown.. and Scam Artist his name is Chris. Quote
pr0blumz Posted August 4, 2010 Report Posted August 4, 2010 That guy is a fucking clown.. and Scam Artist his name is Chris. Care to enlighten us? Quote
oreilys Posted August 4, 2010 Report Posted August 4, 2010 Care to enlighten us? i traded him a banshee and my built blaster for a 10mm cub that was blowed... cylinders were scratched, wasn't a billet crank, never sent carbs or pipes.. and motor was supposed to be fresh and running...wont answer my calls or anything... does anybody have an address for his shop... Quote
pr0blumz Posted August 5, 2010 Report Posted August 5, 2010 i traded him a banshee and my built blaster for a 10mm cub that was blowed... cylinders were scratched, wasn't a billet crank, never sent carbs or pipes.. and motor was supposed to be fresh and running...wont answer my calls or anything... does anybody have an address for his shop... Are you in Ms? Quote
pr0blumz Posted August 5, 2010 Report Posted August 5, 2010 (edited) Noble's One Stop ATV Shop 155 E Porter St, Jackson, MS 39201 Edited August 5, 2010 by pr0blumz Quote
oreilys Posted August 7, 2010 Report Posted August 7, 2010 Noble's One Stop ATV Shop 155 E Porter St, Jackson, MS 39201 problemz are u close by that shop??? Quote
pr0blumz Posted August 10, 2010 Report Posted August 10, 2010 problemz are u close by that shop??? I'm 45 minutes from it. Quote
mysterion Posted August 10, 2010 Report Posted August 10, 2010 That guy is a fucking clown.. and Scam Artist his name is Chris. I second that. The guy is very misleading. I bought some T6 from him. The listing said that the chrome had no flakes, chips, or dents. I pulled them out of the box (which was packed like shit) and cut my finger from all the flakes/chips. So I called him out on it and finally got him to agree to refund me. i sent them back the next day, and kept giving me the run around about how PayPal locked his acct and they are holding his money. After about 10 days I finally got the $$ back. In the end, he made it right but he shouldnt have lied about the condition of the pipes. So beware i have pics but cant get them to upload Quote
jrmarquez.702 Posted August 13, 2010 Report Posted August 13, 2010 that guy is corbit, check out the bad buyer/seller section...He changed his name from corbit to chris.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.