james Posted June 6, 2010 Report Posted June 6, 2010 well i currently gave my shee a make over and when i got to the air filters i removed the k&n pods and installed a toomey single, and when i started jetting i realized that it was restricting the air flow. so i'm lookin for input, what do you run or what sugestions. all input is appreciated heres my set up: .040 over wisecos stock stroke coolhead 20cc domes (for now) 155 psi port work stock carbs no tors dyno jet kit 4th clip 340mains sea level to 1000ft no air box stock cages dual stage reeds timing plate 4 degrees fmfs 91 octane Quote
locogato11283 Posted June 6, 2010 Report Posted June 6, 2010 this will depend on where you ride. do you ride where its wet or with a lot of water holes? if not, id run clamp on k&n's. if so, id run some sort of intake that utilizes the stock air box. Quote
james Posted June 6, 2010 Author Report Posted June 6, 2010 i dont ride through water but i do ride in sand, i had k&ns but they where heavy and they floped and they would fall off Quote
firebanshee Posted June 6, 2010 Report Posted June 6, 2010 i dont ride through water but i do ride in sand, i had k&ns but they where heavy and they floped and they would fall off I run the sand and LOVE the pod filters(K&N clamp on)when the air box is removed i use the mounting tabs and put zip ties through the holes and around the filters to help support them. Quote
james Posted June 6, 2010 Author Report Posted June 6, 2010 thats what i didnt like about k&n heavy, flop and they fall off. i guess a support system would be helpful thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.