96mx Posted February 23, 2010 Report Posted February 23, 2010 Hi I am new to the forum and I thought I would give everyone here first dibs on my banshee project. I live in Fraser,Michigan 48026. This is my mx banshee I was building over the winter all the powdercoating is brand new just done. 1996 Banshee frame powdercoated gloss black ASR MX +2+1 arms fully camber caster adjustable with ASR tie rods new tie rod ends powdercoated gloss black, Brand new Stainless steel speedlinez brake lines front and rear, Brand new (2) ASR brake line clamps,Brand new AC Blackline front bumper powdercoated gloss black Front hubs have brand new bearings and powdercoated gloss black Spindals are powdercoated gloss black Magnum oversized raidator, Brand new Roll design +1 steering stem chrome finish perfect no flaws Roll design anti vibe 1 1/8 handle bar clamps Protaper 1 1/8 contour handle bars with pad atv highs, grey, Brand new Billet iron cross exhaust hangers, Brand new Pro Armor tether, Brand new Msr clutch lever, Brand new Motion Pro clutch cable, Brand new Front brake resivor, lever and thumb throttle have been polished and have new smooth tops UM Racing grill I think it's a V3, Brand new Monster Energy graphic kit and seat cover, Brand new Gforce adjustable axle with gforce wrenches, Brand new -2 swingarm for stock carrier with skid plate mounts powdercoated gloss black, from the swingarm shop on ebay, Brand new Stock axle carrier powdercoated gloss black new bearings and seals Stock sprocket hub powdercoated gloss black, with newer sprocket with only 4 rides on the sprocket Stock brake hub powdercoated gloss black Stock rear hubs powdercoated gloss black Stock kick start powdercoated gloss black Stock rear brake lever powdercoated gloss black Folding shifter lever powdercoated gloss black Pro Aluminom pro peg nerf nets with built in pegs with the kick up at the end, black nets and black nerfs, Brand new Stainless steel bolt kit, Brand new Magnum boost bottle, newer has 4 rides on it Modquad billet case saver, Brand new Chariot Performance billet reed cages with boyeson dual stage reeds, Brand new TORS elimantation kit, Brand new FMF spring and o-ring kit, Brand new Rockstar Energy grips with glue, Brand new Billet hide-a-key, Brand new Sandstorm billet parking brake block off, Brand new Namura top end kit 20 over, Brand new Winderosa complete gasket kit and seals, Brand new Mull Engineering billet water pump drive gear, Brand new Mull Engineering billet water pump impellar the one that goes on the stock shaft, Brand new Clutch cover has been polished The jugs are stock not been ported or bored Have brand new outer bearings for crankshaft Crankshaft is stock and in good shape The cases are in good shape no chain rash Stock carbs All the stock bolts Stock exhaust clamps really good shape Stock airbox with lid and snorckel and k&N filter Have everything to build motor all you would have to do is get the crankshaft bearing changed out and have the jugs bored 20 over for the top end kit. Have Works shocks dual rate with rezzie for the front and a Works ultra cross single rate for the rear with finned rezzie just haven't got them back from the guy rebuilding them. I will get a picture of them up when I get them back. The plastics are white front race cut full white back fenders with a black grill and tank plastic with the monster energy graphic kit. The tires are new only 4 rides on them, They are ITP Holeshots 21/7/10 front 20/11/9 rear on douglass wheels. FMF Fatty pipes chrome is in ok shape it is starting to get a little rust on the back side of the pipes, No dings or dents. FMF Power core 2 silencers are the ones with no sticker and have been polished., Have a little ding on the end cap. FMF Turbine core 2 silencers are the ones with stickers, They are u.s. forestry leagal say it right on the side no dings or dents. Billet exhaust clamps im not sure who makes them. AC chassie skid plate, Brand new. Also have all the stock parts and then some as you can see by the pictures. There is also a 1987 j-arm frame that goes with everything else. I probably forgot to list some stuff it's everything in the pictures banshee related. I was thinking that for $6000 OBO you can have everything feel free to call for any reason (586) 863-6231 names Chris. Don't be shy to make offers worst I can say is no. Can't get every picture on here so just pm me your email if interested and I will send all the pictures. Quote
FATBANSHEE Posted February 23, 2010 Report Posted February 23, 2010 Pmed on 96 frame and plastics Quote
FATBANSHEE Posted February 24, 2010 Report Posted February 24, 2010 if you didnt get the PM email me [email protected] Quote
chetgoff Posted February 24, 2010 Report Posted February 24, 2010 do you have pic of plastics and price? Quote
96mx Posted February 24, 2010 Author Report Posted February 24, 2010 Hi I am new to the forum and I thought I would give everyone here first dibs on my banshee project. I live in Fraser,Michigan 48026. This is my mx banshee I was building over the winter all the powdercoating is brand new just done. 1996 Banshee frame powdercoated gloss black ASR MX +2+1 arms fully camber caster adjustable with ASR tie rods new tie rod ends powdercoated gloss black, Brand new Stainless steel speedlinez brake lines front and rear, Brand new (2) ASR brake line clamps,Brand new AC Blackline front bumper powdercoated gloss black Front hubs have brand new bearings and powdercoated gloss black Spindals are powdercoated gloss black Magnum oversized raidator, Brand new Roll design +1 steering stem chrome finish perfect no flaws Roll design anti vibe 1 1/8 handle bar clamps Protaper 1 1/8 contour handle bars with pad atv highs, grey, Brand new Billet iron cross exhaust hangers, Brand new Pro Armor tether, Brand new Msr clutch lever, Brand new Motion Pro clutch cable, Brand new Front brake resivor, lever and thumb throttle have been polished and have new smooth tops UM Racing grill I think it's a V3, Brand new Monster Energy graphic kit and seat cover, Brand new Gforce adjustable axle with gforce wrenches, Brand new -2 swingarm for stock carrier with skid plate mounts powdercoated gloss black, from the swingarm shop on ebay, Brand new Stock axle carrier powdercoated gloss black new bearings and seals Stock sprocket hub powdercoated gloss black, with newer sprocket with only 4 rides on the sprocket Stock brake hub powdercoated gloss black Stock rear hubs powdercoated gloss black Stock kick start powdercoated gloss black Stock rear brake lever powdercoated gloss black Folding shifter lever powdercoated gloss black Pro Aluminom pro peg nerf nets with built in pegs with the kick up at the end, black nets and black nerfs, Brand new Stainless steel bolt kit, Brand new Magnum boost bottle, newer has 4 rides on it Modquad billet case saver, Brand new Chariot Performance billet reed cages with boyeson dual stage reeds, Brand new TORS elimantation kit, Brand new FMF spring and o-ring kit, Brand new Rockstar Energy grips with glue, Brand new Billet hide-a-key, Brand new Sandstorm billet parking brake block off, Brand new Namura top end kit 20 over, Brand new Winderosa complete gasket kit and seals, Brand new Mull Engineering billet water pump drive gear, Brand new Mull Engineering billet water pump impellar the one that goes on the stock shaft, Brand new Clutch cover has been polished The jugs are stock not been ported or bored Have brand new outer bearings for crankshaft Crankshaft is stock and in good shape The cases are in good shape no chain rash Stock carbs All the stock bolts Stock exhaust clamps really good shape Stock airbox with lid and snorckel and k&N filter Have everything to build motor all you would have to do is get the crankshaft bearing changed out and have the jugs bored 20 over for the top end kit. Have Works shocks dual rate with rezzie for the front and a Works ultra cross single rate for the rear with finned rezzie just haven't got them back from the guy rebuilding them. I will get a picture of them up when I get them back. The plastics are white front race cut full white back fenders with a black grill and tank plastic with the monster energy graphic kit. The tires are new only 4 rides on them, They are ITP Holeshots 21/7/10 front 20/11/9 rear on douglass wheels. FMF Fatty pipes chrome is in ok shape it is starting to get a little rust on the back side of the pipes, No dings or dents. FMF Power core 2 silencers are the ones with no sticker and have been polished., Have a little ding on the end cap. FMF Turbine core 2 silencers are the ones with stickers, They are u.s. forestry leagal say it right on the side no dings or dents. Billet exhaust clamps im not sure who makes them. AC chassie skid plate, Brand new. Also have all the stock parts and then some as you can see by the pictures. There is also a 1987 j-arm frame that goes with everything else. I probably forgot to list some stuff it's everything in the pictures banshee related. I was thinking that for $6000 OBO you can have everything feel free to call for any reason (586) 863-6231 names Chris. Don't be shy to make offers worst I can say is no. Can't get every picture on here so just pm me your email if interested and I will send all the pictures. I am sorry for the confusion it is a part out there is a sale pending on the plastics, bolt kit is sold, turbine core 2 pending, seat pending sorry it is a part out Quote
shee2000 Posted February 24, 2010 Report Posted February 24, 2010 I am sorry for the confusion it is a part out there is a sale pending on the plastics, bolt kit is sold, turbine core 2 pending, seat pending sorry it is a part out pm sent Quote
seabass Posted February 24, 2010 Report Posted February 24, 2010 Interested in the axle. Pm sent. Quote
seabass Posted February 24, 2010 Report Posted February 24, 2010 (edited) PM sent on radiator, clutch lever and cages. Edited February 24, 2010 by seabass Quote
baddsheee Posted February 24, 2010 Report Posted February 24, 2010 PM sent on radiator, clutch lever and cages. possibly interested in a arms. How much? Let me know. just a thought, but post some prices. You're gonna get a crap lod of pms or post asking for prices. Quote
96mx Posted February 24, 2010 Author Report Posted February 24, 2010 No longer for sale sold it all. No longer for sale sold it all. No longer for sale sold it all. No longer for sale sold it all. Brother in law bought it all Quote
96mx Posted February 24, 2010 Author Report Posted February 24, 2010 No longer for sale sold it all. No longer for sale sold it all. No longer for sale sold it all. No longer for sale sold it all. Brother in law bought it all Can someone please delete this ad Thanks Quote
79malibu Posted February 25, 2010 Report Posted February 25, 2010 ohh man brother in law whad he give ya 600.00 for it all Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.