MaD1981MaLL Posted December 30, 2009 Report Posted December 30, 2009 Im tryin to build a 10mill Dm WHO can I trust to do it Right? Quote
shanYE west Posted December 30, 2009 Report Posted December 30, 2009 here's my suggestions.. Nate McCoy, K&T, Titan Racing and A&S is who I would use. Quote
tundish2800 Posted December 30, 2009 Report Posted December 30, 2009 I would say a&s. I have seen a 10mil from there that hauled ass Quote
bada450r Posted December 30, 2009 Report Posted December 30, 2009 i'am gonna say what koolguyson would say.....My builder...no my builder...no mine! My advice is the pick the one that is closest to you. Your tuning ability will play a bigger role than the guy grinding on it Quote
MaD1981MaLL Posted December 30, 2009 Author Report Posted December 30, 2009 What's there # or e-mail or web site I been looking for them!!! Quote
AtvFoxBoy86 Posted December 30, 2009 Report Posted December 30, 2009 What's there # or e-mail or web site I been looking for them!!! I would say go with LC Performance here's there website. http://www.lcperformance.com/ if you call them and they don't answer leave them a message and they will call you back. Your gonna wanna talk to Lynn. I got a 10mill cheetah that he built. Quote
BigRed350x Posted December 30, 2009 Report Posted December 30, 2009 K&T Performance LC Performance A&S Hope you have deep pockets... carbs, crank, straight cuts, lockup, billet gears, pipes, then your chassis... It adds up quick. Quote
swrbansheeboy Posted January 3, 2010 Report Posted January 3, 2010 twister-x2 http://67.199.65.66/twistercrankshaft/ Quote
Paul M Posted January 4, 2010 Report Posted January 4, 2010 Nate McCoy is my choise! but like bada said having your buildr near by is nice when it cones to tuning or dyno work ! Quote
bada450r Posted January 5, 2010 Report Posted January 5, 2010 hey mr.I LIKE SNOW BUNNYS how was dummont?sorry to get off topic but i cant pm for some reason Quote
firebanshee Posted January 5, 2010 Report Posted January 5, 2010 Cameron at Redline Racing builds a good reliable motor also. He also has an onsite dyno and is very good at tuning and does all of his own machine work and case work that you will need for the dm, and he cuts his own domes. (541-367-2453) Quote
banshee(911) Posted January 7, 2010 Report Posted January 7, 2010 i would say nate mccoy as well hes an awsome guy and answered the phone and anny question i had and builds a heck of a motor Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.