badassbanshe Posted November 13, 2009 Report Share Posted November 13, 2009 I just got a new banshee. Its been a long time since my last one. I cannot remember what oil ratio I use to run. It is stock with T-5s. I have heard every thing from 32:1 up to 50:1. What is the correct ratio? When I got the bike he had some mixed at what he said was 32:1 but it fowled plugs. Also I currently have Golden spectro. It was recommended to me at 50:1. But now I have heard it is a very dirty oil and I should run bean oil or amsoil - Dominator. I don’t know what to trust and what not to. Every ones opinion is radically different. Quote Link to comment Share on other sites More sharing options...
papa_smurf49319 Posted November 13, 2009 Report Share Posted November 13, 2009 i run castor 927 at 32:1 Quote Link to comment Share on other sites More sharing options...
4strokekilla1987 Posted November 13, 2009 Report Share Posted November 13, 2009 i run castor 927 at 32:1 x2 Quote Link to comment Share on other sites More sharing options...
87sheerips Posted November 13, 2009 Report Share Posted November 13, 2009 Any oil at 32:1 will work... Don't mess with ratio, just roll with 32:1 and focus on proper jetting. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted November 13, 2009 Report Share Posted November 13, 2009 It depends on what kind of oil it is. Some of the synthetics can be taken out to 50:1 Personally I run everything 36:1 Yamalube for gas Klotz SuperTechnoplate for alky Quote Link to comment Share on other sites More sharing options...
qboronyrican Posted November 13, 2009 Report Share Posted November 13, 2009 amsoil 40:1 Quote Link to comment Share on other sites More sharing options...
fastbanshee199 Posted November 13, 2009 Report Share Posted November 13, 2009 amsoil 40:1 I run amsoil interceptor at 50:1. 9 years later and im finally doing a top end rebuild. i figured that was a pretty substantial amount of time. the cylinder walls look great and havent seen any major scarring or anything like that. Quote Link to comment Share on other sites More sharing options...
crustydemon Posted November 13, 2009 Report Share Posted November 13, 2009 I run Klotz Benol or Supertechniplate at 32:1. Castor bean oils burn dirtier but protect better so I dont go full synthetic on anything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.