WayBackWhen Posted November 9, 2009 Report Share Posted November 9, 2009 Ok I just bought my Shee, barely able to ride it when the sun went down, but I know for sure, the first thing Im going to investigate is, how difficult the stickers will be to take off. Any ideas to make it easier? My plan of action was to first attempt to peel them, then use Goo Gone on the remaining, if that doesnt work, Im going straight to the power washer. If anyone has anything that will make this easier, gimme a shout Quote Link to comment Share on other sites More sharing options...
quikshee Posted November 9, 2009 Report Share Posted November 9, 2009 Just go straight to the power washer Quote Link to comment Share on other sites More sharing options...
Rodneya Posted November 9, 2009 Report Share Posted November 9, 2009 Warm them up with a heat gun. The goo will come off with the sticker. Just dont make them too hot. Quote Link to comment Share on other sites More sharing options...
banshee#44 Posted November 9, 2009 Report Share Posted November 9, 2009 heat with a hairdryer and peel Quote Link to comment Share on other sites More sharing options...
DallasGDub Posted November 9, 2009 Report Share Posted November 9, 2009 A good trick is to heat it from the back side of the plastic with the heat gun. You want to try and heat the glue more than the sticker itself. The more glue you get to come off with the sticker the easier. Quote Link to comment Share on other sites More sharing options...
broncbob Posted November 10, 2009 Report Share Posted November 10, 2009 Car wash. Cold high pressure takes the sticker off, then high pressure warm to get the goo off. Skip the goofoff, it can melt some plastics. Just ask my brother what happened when you try and clean the frames of Oakley gas cans! Quote Link to comment Share on other sites More sharing options...
TwistedSheeRida Posted November 10, 2009 Report Share Posted November 10, 2009 hair dryer if there is any goo left wd-40 Quote Link to comment Share on other sites More sharing options...
bode1 Posted November 10, 2009 Report Share Posted November 10, 2009 I've aways used a heat gun. They come right off Quote Link to comment Share on other sites More sharing options...
evro Posted November 10, 2009 Report Share Posted November 10, 2009 like everyone else said, heat for the sticker. WD40 works well, but i use lighter fluid for any adhesive residue. Quote Link to comment Share on other sites More sharing options...
White97Banshee Posted November 19, 2009 Report Share Posted November 19, 2009 I just start ripping em off and whatever's left I blast it with brake cleaner and scrub it with a rag. Maybe that's why my bike looks like shit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.