sheefreak Posted August 19, 2009 Report Share Posted August 19, 2009 I think what you are doing is great.....I wish I had the ability, and access to tooling to do what you are attempting. I am interested in the outcome. Obviously you are not going to end up w/a 200 plus horse monster you would w/the billet cases and aftermarket cylinders, but I don't believe that is what you are after anyway...... Good luck w/it. Quote Link to comment Share on other sites More sharing options...
FireHead Posted August 19, 2009 Report Share Posted August 19, 2009 O by the way there are some triple banshees out there; and the ones ive seen are either 2 cases mated up together or are $2000 billet crank cases. I dont feel like spending 2 grand or a lot of hours righting a program to hog one out. The last set of billet cases I made only cost ~$300 for the metal......... :geek: Quote Link to comment Share on other sites More sharing options...
slopoke Posted August 19, 2009 Report Share Posted August 19, 2009 i sure wish i was that talented. I do good to get legos to mate. Please post pics and keep up the good work. Its amazing to me Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted August 19, 2009 Report Share Posted August 19, 2009 a 521cc triple... I wonder what kind of torque numbers it will make? will you be able to dyno it after you get it running? Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 19, 2009 Report Share Posted August 19, 2009 I have a Flywheel and coil from a h1 500 triple I could hook you up with, I coudnt see it being that hard to modify it to fit, pop out the rivets and swap them out, maybe move the tabs around. Might have to maKe a New timing plate for it to fit the pickup. Or mAybe it just might slide right on there, or Maybe just stick with the stocker Quote Link to comment Share on other sites More sharing options...
portingjunky Posted August 20, 2009 Author Report Share Posted August 20, 2009 here are some pictures of the engine i am building http://s591.photobucket.com/albums/ss358/p...nt=P1010578.jpg Quote Link to comment Share on other sites More sharing options...
slopoke Posted August 20, 2009 Report Share Posted August 20, 2009 awsome Quote Link to comment Share on other sites More sharing options...
portingjunky Posted August 20, 2009 Author Report Share Posted August 20, 2009 I have a Flywheel and coil from a h1 500 triple I could hook you up with, I coudnt see it being that hard to modify it to fit, pop out the rivets and swap them out, maybe move the tabs around. Might have to maKe a New timing plate for it to fit the pickup. Or mAybe it just might slide right on there, or Maybe just stick with the stocker I looked on ebay and i think i sall a h1 500 fly wheel and it didnt look any were near to a banshee flywheel. maybe it wasnt. any chance i could see a pic. And to the guy asking about getting it dynoed i would consider getting it done but its not going to done for a while. Quote Link to comment Share on other sites More sharing options...
lt250rfd Posted August 20, 2009 Report Share Posted August 20, 2009 here are some pictures of the engine i am building http://s591.photobucket.com/albums/ss358/p...nt=P1010578.jpg great pics, good luck with the build. please post some more as it progresses. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted August 20, 2009 Report Share Posted August 20, 2009 I've seen a stock cylinder tripple before.. I was in GRR's shop and he had one sittin on his bench. I didn't think anyone else would attempt it. Good luck on the build let us know how it turns out. Quote Link to comment Share on other sites More sharing options...
ratt468 Posted January 17, 2010 Report Share Posted January 17, 2010 I've seen a stock cylinder tripple before.. I was in GRR's shop and he had one sittin on his bench. I didn't think anyone else would attempt it. Good luck on the build let us know how it turns out. any updates on this motor?,also pic don't work Quote Link to comment Share on other sites More sharing options...
ratt468 Posted January 21, 2010 Report Share Posted January 21, 2010 any updates on this motor?,also pic don't work to the top! Quote Link to comment Share on other sites More sharing options...
209pinitTOwinit Posted November 2, 2012 Report Share Posted November 2, 2012 bringing back to life a new thread... yea 2 years old almost 3.... i would like to see this build if u still worked on it or did u give up on it? the pics i seen were awesome. Quote Link to comment Share on other sites More sharing options...
209pinitTOwinit Posted November 2, 2012 Report Share Posted November 2, 2012 new was supposed to be old sorry lol Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted November 2, 2012 Report Share Posted November 2, 2012 Last Active Oct 27 2010 10:28 AM Im going to guess that this never transpired to shit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.