twizted269 Posted February 16, 2009 Report Posted February 16, 2009 where can i find a stock uncut key blank? want a spare key. Quote
Chris-in-Cali Posted February 16, 2009 Report Posted February 16, 2009 They will charge you an arm and a leg!! One thing I have learned...BEER+DESERT+KEYS= HEADACHE!!! Use copper wire to splice the ignition clip and relocate your kill switch to a spot only you know. Quote
shanYE west Posted February 16, 2009 Report Posted February 16, 2009 or.. buy a another key assembly w/key... if you loose yours.. just unplug the old..and plug in the new one. Quote
brugal Posted February 16, 2009 Report Posted February 16, 2009 Or have a locksmith cut you a new one. Quote
shogs Posted February 16, 2009 Report Posted February 16, 2009 Or take the nuts off the rims every time you stop riding. Quote
spurdy Posted February 16, 2009 Report Posted February 16, 2009 (edited) Banshees have key switches? :blink: Edited February 16, 2009 by spurdy Quote
twizted269 Posted February 16, 2009 Author Report Posted February 16, 2009 i have a key for it but its one of the long shaft curtis ones. i already broke off two of them and its a pain in the ass to get it back out. just want a stock one. found it at the dealer for $7 but thought maybe somewhere online i can find it cheaper. Quote
278 Posted February 16, 2009 Report Posted February 16, 2009 Just get rid of the ignition switch and splice the 2 wires together, if your worried about someone taking it just unplug one of the ignition wires where the stator connects to your electrical system ontop of the motor. If anyone wanted to take it all they got to do is break the ignition wires and twist them together anyways Quote
twizted269 Posted February 17, 2009 Author Report Posted February 17, 2009 Just get rid of the ignition switch and splice the 2 wires together, if your worried about someone taking it just unplug one of the ignition wires where the stator connects to your electrical system ontop of the motor. If anyone wanted to take it all they got to do is break the ignition wires and twist them together anyways the problem is that the run switch doesnt work right now so ive been using the key for the kill switch. Quote
278 Posted February 17, 2009 Report Posted February 17, 2009 Thats easy enough to fix, order a new kill switch. Or you can go down to the hardware store pick a switch that you like and splice it in.... make sure its wether proof Quote
locogato11283 Posted February 17, 2009 Report Posted February 17, 2009 keys on a banshee are worthless. just ditch that shit. Quote
spurdy Posted February 17, 2009 Report Posted February 17, 2009 the problem is that the run switch doesnt work right now so ive been using the key for the kill switch. Your switch is probably fine. Likely got dirt or sand or something in it keeping it from grounding out to kill your ignition signal. Pretty simple switch and its likely it could be fixed. If someone is going to steal it that key isn't going to do shit. SP Quote
twizted269 Posted February 18, 2009 Author Report Posted February 18, 2009 Your switch is probably fine. Likely got dirt or sand or something in it keeping it from grounding out to kill your ignition signal. Pretty simple switch and its likely it could be fixed. If someone is going to steal it that key isn't going to do shit. SP run switch is clean and connection is fine. has a short somewhere in the harness and havnt found it yet. i know it wont stop theft. just using it as a kill switch and want a key that doesnt stick 2 inches out and break it off again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.