Jump to content

Recommended Posts

Posted

does anybody run 92 or 93 octane fuel with ethanol in it because the only gas station around me that sold 92 just went out of bussines, so am i ok running ethanol?

 

thanks

Posted
Bush made it a federal law that all unleaded pump gas has to be at least 10% ethanol.

that's weird, i can only get 90 octane because the stations had to get rid of the ethanol few years back

Posted

Very true. The problem with ethonal is, once it sits for a few months, it basically turns back into corn. It sludges up bad. Not a good idea to let it sit in your carb bowls while your bike sits over the winter. Really, if you store it for the winter, you should also drain the tank.

Posted
Very true. The problem with ethonal is, once it sits for a few months, it basically turns back into corn. It sludges up bad. Not a good idea to let it sit in your carb bowls while your bike sits over the winter. Really, if you store it for the winter, you should also drain the tank.

 

 

thats right gas has no shelf life now because of the ethonal

good point

Posted

87, 88.5, 90. i belive we also have the highest amount of seasonal vehicles per capita. it makes sense to improve air quality with so many running on old gas coming out of storage

Posted

Fuel Station near me sells all sorts of fuel ratings, from 87-116 and everything in between. Then propane, Diesel, Kerosene, all that fun stuff as well.

 

And yes don't leave fuel sitting, especially with ethanol and 2 stroke oil...goes south pretty quick!

Posted

all stations have 10% ethonal. it is even hard to get conventional gas (any gas without ethonal) at any termial around michigan anyways. just don't let water get in. the ethonal will suspend the water in your tank instead of seperating. i have pumped out many a tank because of that problem.

Posted

do you think old gas can cause an engine to gernade i think now mayby some shitty gas is wat caused er to blow cause its ben fin on a 40-1 until latly its ben overheating and siezing for no apparent reason.i got all my top end parts on the way for the rebuild

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...