04titanse Posted October 22, 2008 Report Posted October 22, 2008 I have to ask..how the hell do you guys keep your bikes frames and swingarms so damn clean and shiny!?!?! Like i understand clean plastics and wheels etc....But it would take me a whole f-ing weekend to get my bike to look 1/2 as good as some of yours. How do keep those swing arms clean with chain lube and dirt and shit all getting stuck to it? Like my street bike is easy to keep looking showroom, but the quads are a different story!!!! Quote
F.BEJARANO Posted October 22, 2008 Report Posted October 22, 2008 alot of us ride sand only and its not too hard but it still takes me hours to maintain my quad. after every ride i clean filters etc and detail the thing. i think its an obsession or an o.c.d. thing. i use a tooth brush and other tools to clean mine. but the guys that ride dirt....i dont know how they do it. Quote
Tapatalk Posted October 22, 2008 Report Posted October 22, 2008 plastic bag over the airfilters and a power washer. then fine detail cleaning if you wish but im not into that. just gonna get dirty again anyway. thats why i stopped cleaning my tuck by hand too. now it just goes thru the car wash and wala. Quote
Michael Jackson Posted October 22, 2008 Report Posted October 22, 2008 simple, dont ride it, and do frame up rebuild every 2 years i think most peoples signatures are also right after they rebuilt it, before its been ridden, if not, i also wonder how the hell most of these bikes look as clean ass they do Quote
04titanse Posted October 22, 2008 Author Report Posted October 22, 2008 This makes me feel a little better. Once and a while i will give her a good detailing but after a weekend in the dirt and mud it only gets so clean without being excessive. HillClimbr - I have resorted to the same thing with my truck. I prob only was it twice a year by hand and the rest at the local $5 car wash Quote
Snopczynski Posted October 22, 2008 Report Posted October 22, 2008 Bike wash, it works wonders. Quote
jharader Posted October 22, 2008 Report Posted October 22, 2008 my 97 needs painted bad BUT ill be damned u find any dirt on them bitches after a ride. its to the carwash, then my patio for an extensive cleaning polishing process. I polish the pipes after every ride. rims swingers all of it. about 20 bucks, 15 microfiber towels, some neverdull, 5 hours later there done n put away. then repolished before the next ride. I've learned a clean machine operates better and are easier to maintain. I don't ride dirt hardly at all. dunes are 2 hours away im cool with that Quote
Snopczynski Posted October 22, 2008 Report Posted October 22, 2008 I use this stuff. Sparay it on, rub down with a mit, wash off. http://www.bikebrite.com/EnglishMotorcycle...orcycleWash.htm Quote
donkeypuncher Posted October 22, 2008 Report Posted October 22, 2008 quick douchen before trip, thurough douchen after trip, polish everything every couple of trips. easy as that. Quote
jamebo Posted October 22, 2008 Report Posted October 22, 2008 I detail my quads pretty much after every ride, then wipe the frame, footpegs, axle ect. with WD-40 afterwards. Then Armor-all the seats. Keeps them looking new. My SUV is another story, I only wash it a few times a year. Reason being is where I work. As soon as I wash it, the first day I go to work it looks like it hasn't been washed in a year! Lots of mud and dust out there Quote
dirtydownunder Posted October 22, 2008 Report Posted October 22, 2008 you have to pull all the plastics off and get in there with a brush, it takes me way too long to clean it but i couldnt leave it dirty and it gets pretty covered sometimes. Quote
KaosBanshee44 Posted October 22, 2008 Report Posted October 22, 2008 Before i did my rebuild i used to wipe mine down almost everyday. I think it had alot to do with OCD and being neat and maticulous about my bike. Gives me something to do in the garage with the buddies while we drink a few and shoot the shit. Quote
dragbanshee Posted October 22, 2008 Report Posted October 22, 2008 Wash it as soon as you can after every ride or else you put it off and the longer you wait the harder it is to clean. Shit dries up and if you had any fuel leaking out the bowls or anywhere else, that oil&gas along whith the dirt dries and sucks to get off. I enjoy looking at a clean bike, it makes me want to wrench on it even more. And like said its easier to maintain. Quote
Stellar Performance Posted October 22, 2008 Report Posted October 22, 2008 My bike is strictly for going racing in the dunes. But after every trip I place a plastic bag over the airfilters and do a light pressure washing. Then I blow dry it with compressed air. It helps to blast the majority of the water beads off and then I wipe the excess water off with a micro fiber cloth. A little wax on the front fender and she still looks like new. My sig pic was after my last trip out with the bike. Quote
05.Banshee.SE Posted October 22, 2008 Report Posted October 22, 2008 +10000000000000000. A clean bike sure as hell runs better, and it's a million times easier to wrench on. I rip it apart from time to time and clean ALL of it, and just do maintenance cleaning between those. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.