ISSUES Posted September 5, 2008 Report Posted September 5, 2008 Well i did a search found nothing, What is the best way to install the swing arm bearings, trying to find out before i get it powdercoated so i know what to do first. Thanks for any help guys Quote
locogato11283 Posted September 5, 2008 Report Posted September 5, 2008 wait until after its powdercoated.. then press them in. Quote
ISSUES Posted September 5, 2008 Author Report Posted September 5, 2008 wait until after its powdercoated.. then press them in. Thanks for the quick reply and your help! :biggrin: Quote
locogato11283 Posted September 5, 2008 Report Posted September 5, 2008 Thanks for the quick reply and your help! :biggrin: no problem man.. where are you riding in missouri? im up about 30 mins north of KC. Quote
spurdy Posted September 5, 2008 Report Posted September 5, 2008 no problem man.. where are you riding in missouri? im up about 30 mins north of KC. Over by St. Louis. Quote
ISSUES Posted September 5, 2008 Author Report Posted September 5, 2008 no problem man.. where are you riding in missouri? im up about 30 mins north of KC. No where really i traded for my shee back in Nov, I haven't been out riding any where yet except my yard and streets. working on getting it back together just had the frame P/C working on fixing little things and replacing stuff that is need. Wanting to get done and go out and ride this beast. Quote
ISSUES Posted September 5, 2008 Author Report Posted September 5, 2008 What are some good bearing kits that include everything? My old swing arm along with everything inside it was trashed badly. I'm going to put some zerk fitting in the swing arm and the new pivot bolt when i get one and to be safe put one in the carrier as while. Quote
brugal Posted September 5, 2008 Report Posted September 5, 2008 I'm going to put some zerk fitting in the swing arm and the new pivot bolt Good move,I crossed drilled some wholes in the pivot bolt and added a zerk on each side. I dont remember where I got the bearings :ermm: might have been alba. Quote
XxMeltIcexX Posted September 5, 2008 Report Posted September 5, 2008 http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sspagenameZWDVW Quote
ISSUES Posted September 5, 2008 Author Report Posted September 5, 2008 http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sspagenameZWDVW Thats i pretty good price for that kit, just gotta pick up the end caps if/when i get that. Thanks Yes it is a good move, i really don't want to keep replacing all that crap all the time, cause damn that bolt alone is 40+ shipped. Quote
bbcmudtruck Posted September 5, 2008 Report Posted September 5, 2008 Dam Ice, thats a good find right there. I have used "Pivot Works" in my last two swing arms and they come with everything you need including caps. You can find them on ebay or in rocky mountain atv. Ryan Quote
ISSUES Posted September 6, 2008 Author Report Posted September 6, 2008 (edited) Damn i didn't know we had this many guys from Missouri on here, All but two post are a Missourian lol Edited September 6, 2008 by ISSUES Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.