ledofthezep

Dunno for sure...welding the crank helps to eliminate the problem of separating. I would say if you get around or above 200psi, it may be a safe investment.

And you say it like that's a bad thing...best to be honest from the beginning. You may try a search, there's quite the controversy in heims vs. ball joints. Anymore more people are going with replaceable ball joints. I run heim style LS a-arms, and my good friend who builds sandrails for a living swears by heims & uses them on all of his sandcars. As long as you keep shit clean & lubed, I don't think either is really soo much better than the other to the average weekend warrior. What arms are you considering? Hope this helps somewhat... And, Welcome to bansheehq!

Werd! Goes to show that being short, in some cases, can be a good thing.

Me, offend someone. Just wait until next weekend...

Well...I can do that. But I'm not easily offended. Quite frankly, I am a sick minded individual. But...bullshit is bullshit, when considering bullshit.

BCG - "Bloody Chunk of Grunt" Del Pez

Look like the rubber gromets for the stock pipe mounts.

Bent shift forks. I did the same thing to help remedy mine...and it worked...but only for a while. Got a shift fork assymbly from an 01, installed it, have had no problems since.

You can't tripple stamp a double stamp stan!

Damn. Tell us how you really feel...

Should be good to go. Welcome to the HQ.

If they don't sell, bring'm with ya to LS & we'll get them sold...

Damn...1st for me. Never seen that B4. I absolutely hate tightening those little bastards, can't cound how many I've snapped, just getting them to the propper torque. I will tell you that the screw holding your front fenders will work as a temp....

Let the stator dry up, put the cover back on & try it. If it works, seal that bitch up good to keep moisture out in the future. What's the stator look like? Checked it with an OHM meter?

I'm waiting for the day that LS, ok starts charging at the park entrance. More money to fund all the other state parks...

1wk, 1day, 13hrs, 17min, & about 30sec's to be exact at the time of this post.

I run it in my buggy, stroked VW motor w/a little Marvel's Mystery Oil...I have ran it in my banshee, noticed no power gains, just a gain in running temp. If you can run pump gas, do it.

Always good to start with the plastics. Get yourself a clymers manual & it will walk you through everything. Get yourself a box of ziplock baggies & a permanent marker to keep all your nuts & bolts together for various items & parts. Take pictures if you need to. There's not a whole lot to it, and if you get into a bind...that's the luxury of bansheehq.

Hell yeah it would! I'd have to get the 'OK' from Lee 1st & it'll be on. Thanks for the offer! And of course, HQ members would get a discount. Hopefully soon, I'm waiting to hear back from a couple banks on a loan; while I still got a job... It should be soon, the more I hear of people wanting things, the more eager I am to get going with it. The only drawback I'm going to have for a while is that I'll only be able to print 23" x ? - however long, until I can afford a more expensive, bigger, printer/cutter. If you're in a hurry, send me the graphic & size you need & I'll contact some printers & get you some quotes & ETA's in the meantime. Primarily Adobe Illustrator, I have a lot of PS experience, but photoshop isn't the best for working with vector graphics. I also use some Freehand 10. I may be getting into some AutoCAD classes before too awful long, may hit you up if I have questions.

Couldn't agree with ya more...90% of posts that appear to be bullshit by the subject I just ignore. On a daily basis I see shit that has no bearing to anything relevant to the HQ, but... Without admin rights as a mod, does me no good to look at them & I'm not going to narc every idiot out to a mod...I got better shit to do.

No complaints...takes some getting used to, but I like the shit out of it. Much better handling in the air & hook up is great. Can get a bit exciting when dragging, but if it hooks & you can keep the front end down for the most part, holeshots are not an issue.

I went with Fireball Metallic Red - Dupont auto paint, not rattle can. Turned out pretty slick, looks almost like a dark maroon unless it's in the sunlight.

Well, life still sucks pretty much...but I'm just goin' with the flow. Getting some more ride time in, still slaving for my mom re-modelling her house, just trying to stay busy. Hoping to get my graphics printer/cutter soon so I can start doing graphics. Hoping it goes well, if so I'm going to open up small business, sole proprietorship or an LLC & apply for some federal grants, get some other printers for metal, glass, shirts, all sorts of applications. We'll see how it goes. Going to collect some unemployment for a while, spend some time @ the dunes...if I do start an actual business I'll have to drop the unemployment. So that's why I'm wanting to start out with a small printer to see if the market is there like I hope/want...may go back to school & finish up my bachelors in Business Admin, just undecided. The Ex is driving me nuts, trying to mind fuck me I guess you could say, or keep me at bay, but whatever...kinda expected after damn near 5yrs. She's seeing how 'great' the single life with loser friends really is. We've talked a bit, but just on a 'howdy' basis pretty much. I'll live...but like I want to & not for her anymore. Other than that...just working until they tell us to leave, only staying for the 1month's severance pay & 80+hrs PTO & Vacation time they'll be paying out to me for staying.

LOL...give her the shocker, she will see the light!