Southside Motorsports

pic 5 last pic.....

pic 4

pic 3

pic 2

let me know if you plan on going out there....heres some pics of my moped with the pixx on it.

exactly...I know of guys that have made around 79-83 hp on gas with a 4mm stock cylinder motor.

This quad in the pictures makes around 230hp. http://img30.exs.cx/my.php?loc=img30&image...edsnomo40bn.png http://img30.exs.cx/my.php?loc=img30&image...edsnomo51km.png hope these pics help

I my self have not owned one but i have built a couple with a few of my buddy's the most recent one that we did was a zr700 based motor with a 900cc big bore on alky putting out around 190hp. Heres some pics of a nice snomo quad that a guy on planetsand just finished up....it's very similar to how we setup the last one we built. http://img30.exs.cx/my.php?loc=img30&image...edsnomo14to.png http://img30.exs.cx/my.php?loc=img30&image...edsnomo27sa.png http://img30.exs.cx/my.php?loc=img30&image...edsnomo32zw.png

easily

bogart have you heard if there is still ice on anchor bay??? If so it should be thickened up in a couple days it's supposed to be cold as hell for a long time now.

yes, you will get around 90-95 hp out of a 400 cheetah on gas with a full drag setup.

you need to setup a jackshaft on the back of the secondary clutch with a sprocket on it.... I will see if i can find some pictures.

haha....I can't wait til i get a kit for mine......10mm cheetah with around a 40hp shot.

call up brad tyson or dan @ a&s either of them can get you any size cheeta setup that you want. www.tysonracing.com www.bansheeracing.com

I will let you know for sure...I can ask brad this weekend if he knows of any one that has any.

Call up Brad tyson... He is also located in MI which is convienent.....He is putting an 80 hp. shot to a completely stock set of cylinders....NO PORT WORK with a 4mm crank. i believe he had it on the dyno and turned around 115 hp. Call him up and talk to him. Tell him nick sent you. Hope this helps.

I got a set of 10-3's (tires and rims) for $275 shipped from wicked atv. You can see a pic of them on my bike in one of my other posts called....Finished project pics.

Bogart you should have bought the set of ice picks from me that i just sold. They would have been perfect for your bike.

cool....look me up if you see me out on the ice...or let me know when ur gonna be out there.

Just finished the bike in october....haven't had a chance to dyno it yet...i will post the sheets when i get it done....I can say that the pipes work great on my motor. The ones i have are a little bit different from most though, as they were built specifically for a 10mm cheetah.

I had the chroming done by a shop in oregon...they are nationally known for how good their work is. It cost $200 to get the swingarm done.

I have a set of shearer's on my bike that i haven't had a chance to get chromed yet and i just keep them coated with wd40 and rust doesn't touch them ....I just spray it on a rag and wipe them down before the bike will be sitting around for any period of time.

thank you

profile shot

closeup of the pattern.....