Southside Motorsports

why are you guys looking to run such small rear sprockets??

be careful out there on that soft ice guys... good luck

sweet...

that sucks

sweet...let me know if it works....

you can get marvin shaws in any length that you need.

ok take either I-69 or I-94 into port huron towards the bluewater bridge....don't get off on the bridge ramp...continue to the highway end and turn left at the first light after the bridge, continue past the elementary school which will be on the right hand side then turn left on riverside drive....continue down riverside drive til you get to the boat launch which will be on the right...when you get to the boat launch get on the river and ride east (under the overpass) and follow the river til you get to the water st. boat launch (boat launch is just before downtown area on left hand side of the river).....let me know if you have any questions.....as it is good and cold saturday night I will be out there. Feel free to bring any friends that you have with bikes quads or sleds the more the merrier, but there will be no sleds let run on the track.

Money was sent out to you last week certified mail.....If you would like i will send you the tracking number.

Im setting up a track on the black river this weekend...that's where i will be. Let me know if any of you guys want to come out i'll get you some directions. It's going to be smooth clean ice without sleds to interfere and fuck it up. pretty much a private deal.

in the pictures those are stock cylinders...they must just be sleeved to a 409.

no, i need to get the bike dialed in on motor and get used to riding it before even think about spraying it.....maybe later on next summer or somthing.

On mine i have a 17/42 for the ice....but it's a big motor......On your bike i would start out at stock gearing and work with it from there. stock is like 14/44 i think .

the marvin shaw is the only way to go for dragging if you're going to run a shock...it's light and can be setup to be stiff like it needs to be....

heres the website....his number is on there. www.rdzracing.com

the only reason they are so high is because the wheels have to be custom made....the actually use a total of 4 rims to make two.

i got those from wicked motorsports... www.wickedatv.com

right off shore behind the rocks....they over ran and over plowed one track and the ice got then and he went through. Kinda dumb considering it could have been avoided by not running the same track two weekends ago and by having more than one track.

I know of a few fast guys that will be out there....i'll be out around 12ish

Glad to hear that you ran well brandon, i called the only guy that i know with a plow and he can't make it....Do either of you guys know of anyone with a plow??

I also will be out there sunday.

that sucks man, i would check out your cdi box too.

they are junk then if they need to be reconfigured.....you can redrill them and leve the previous holes empty because the tube will blow out in the spots where there are holes.

I will be sending the money out to him tommorow.

thanks man

I didn't really look at them that closely when i sold them i had alot going on and just took some pics and boxed them up. I should have dealt with it in a better manner and i realize that.