Andreb84

68mm lol them cylinders sucked on my bike no matter how much i tried to jet them they ran like shit...i pulled them off and they looked hogged out as fk to me

Sent from my iPhone using Tapatalk

Lol what kinda port is this

Sent from my iPhone using Tapatalk

Lol yeah kam hit me in the head pretty damn good...i sent my tranny to get a pro mod thinkin 200 is nothing by the time he got done it was 500...he replaced 3 of the forks a gear a new set of hot rod bearings the shift shaft and im sure theres something else i forgot

Some pics of the inner hub didnt know if it was time to let it go or not bought a new one anyway Sent from my iPhone using Tapatalk

Heavy duty springs..,bought a new inner and outer hub while i was at it lol i feel like im building a new bike from scratch damn near every part is new

Yeah i talked to him yesterday he said the brand is the same but the part number is different...i dont mind spending money on my bike if its worth the additional cost.i went ahead and bought the fast clutches everyone seems to like them....iv'e been using ebc clutches for years and kit after kit i can tell you from personal experience they suck

I got it

Smh could never get pictures on here it says everything is to big

I have another question how do you guys tell if the inner clutch hub is worn??? My bike shifted like crap tons of mis shifts the thing would roll bad when you reved the bike with the clutch pulled in...i tore everything down and started over...just looking at it i notice alot of grooves but since i have no idea what im looking for i cant tell if thats normal or not So far i have a pro mod tranny from redline a hinson clutch basket with HD backing plate a new clutch kit from fast with HD springs and a new inner and outter clutch hubs on the way and a new clutch cable ...if im missing anything let me Know

I just ordered the clutch kit from fast with HD springs...i hear the asv levers work better than the lever jeff sells...i would have given the lever jeff recommended a try if i dodnt have asv levers already guess i"ll find out

Gonna sound like a noob question but what difference does the springs make

I"ll be doing about 60-40 Trail and drag...should i opt for the drag clutches or trail clutches from driveline

I wish i could find a way to post a picture but jeff sold me an sfk brand tz bearing...which was $90 they come in a blue red and white box the same brand is sold on ebay You get a max load and tz bearing for the price i paid for one tz bearing from fast..its not the cheap bearings hat arent machined for a c clip it looks to be the identical bearing lol i really do hope im wrong because i'd rather be wrong than to feel like i got played for my money

Im not committed to anything yet its not impossible to get good work for cheap but alot of the times its also a red flag just trying to figure out which category hjr falls under...cheap as in unreliable time bomb or good work for low prices Why is the crank so cheap??

I was just thinking about letting hjr build a 10 mill cub for me..,but I kept looking at the price I spent way more then 1500 on my 4 mill set up how is it possible that I can get a 10 mill from hjr without it being junk A 10 mill crank on eBay is 900 all day but he can sell you one for almost half that price??? Sounds to good to be true..what's wrong with the cranks he sells and why is his work so cheap

I heard that fast makes a good clutch kit...but i dont know lol kinda left a sour taste for me when i ordered a tz bearing from fast for almost 90$ and i could have got a whole bearing set from ebay for the same Price same brand and all I might give driveline a shot

Yeah i recently got a pro mod done from redline i want a new clutch kit to go with it So driveline or fast it is thanks guys

Looking to buy a clutch kit that actually lasts...been using ebc clutches and they dont hold up worth a damn Any reccomendations on a good kit to buy would be appreciated

So i did a complete tear down on my 421 due to problems shifting...got a pro mod from redline now im going to go ahead and change out the crank bearings while im at it Can anyone tell me what the difference between a tz bearing and a max load bearing is?? Just for example fast has a max load bearing for about $50 a tz bearing is almost double the price what does it do differently and is it worth the extra cash

silver vein and what??? i have a few color combos to choose from i dont mind adding that to the list