wayne_smith97

What does modding the dogs do?

You talking about grinding the dogs off?

I metered it black to yellow and then yellow to frame. Is this what you mean? I assumed that since the black wire has a ground terminal on it.

I was thinking i wanted the dune/play port. I get a lot of top end out of it and still have some low end. Im glad you said something about the pancake bearing. I didnt think about it. I thought about modifying the stock timing plate so i can advance the timing. How would i tell how far its advanced. Jereme thanks. Thats what i will do to mine but probably use cpi in frames. Yall thank thats a bad idea?

What do you mean get the head cut?

What you want for the sst'z. pm me

With my limited banshee knowledge. Clean and check carbs first, then pull head and look at cylinder. Always rule out easiest and most likely things first. Let me know!

Just for the record johnnyboy will have crank trued and welded before it gets out of hand

Thats a response i have been waiting for! So its possible on a stock stroke. Some pipes port work and jetting. with a little gear adjustment will get me where i wanna be. Got a new guy with us on a quadzilla. Gotta build up enough to smoke him too! I pretty sure a banshee will do it but just gotta get it done. On my cz's there is a double the displacement rule in ahrma and avdra. If this correlates then a banshee should be able to smoke a 700 raptor. Right?

Good write up! I have a stock timing plate i am going to do this to. One question. How do i know how far advanced i am?

No i dont have anyone i know that rides a shee. Dont really wanna buy one if i dont know for sure. Know what i mean.

Come on guys

Skin is pretty thick just took a minute to figure it out. That this is just a bunch of joking around. I have seen some extremely smart people too....

I gey good readings for the pick up and ignition side of the stator, but when i check the lighting side black and yellow wires i get no ohm reading whatsoever. Does this definately make iy bad. My thinking is yes because the cdi and coil pull some electricity. Right??

You got a stator too?

What do we recommend i do?

So my banshee stock isnt going to be enough to out run them? I dont like the sound of the 19 tooth front sprocket. It would be a snail off the line

Starwriter are you saying to pull high speed i need to do major work or my shee is going to look like the one in the pic

10's in the front and 9's in the back

I can say i have noticed its definately not your run of the mill forum. However just browsing through all the topics there is some extremely smart people on here.

Not afraid to spend money. just dont want to til after february

Fbt pm me on T6's

Any decent stators or coils or cdi' s. Trying to line up this stuff for my shee

Need a decent set of tires. no sand paddles im 500 miles from dunes here. just a cheap set that will hold air. Anybody got anything?

Wyked pm me on the sst's please