I ended up turning the springs tighter for starters, every 5 turns I would gain about 5/8" I ended up turning it 15 turns and gained 2" but now is it too stiff ?
The dial on the knobs is set at its highest point as well ( that is the way they came ) so what is a good starting point to set the knob at ?
I purchased these for either my rator 660 or my banshee, I do not have the a arms yet for my banshee so I put them on the raptor.
The a arms are alba arms and take ether a stock shock or a 17" shock, the stock length on a raptor is 15 3/4" and these shocks are 16 3/8" ( they were said to be 16.5 but I measure 16 3/8 )
I put them on the long travel side of the raptors alba arms
Clearence on the quad with the stock shocks in the stock alba a arm location I had 12" under the center of the front of the frame, when I put these elka shocks on the long travel set up it sat at 8.5 " and with the 15 turns it now sits at 10.5 "
The picture shows the shocks as I received them.