crazycracker520

X2! crazycracker

It really looks like an iron sleeve in those cylinders to me!! crazycracker

This is what I got little dusty but they are nice

I have some cut white fronts wth a silver radiator cover. I'll sime pics later! crazycracker

I built one pretty cheap! 421 cub cyl, gaskets, stud ext: $850 TW HR 115 +4: $400 Pistons & 24cc BB domes: $220 crazycracker

Awesome! If you find it and get a chance to run the numbers, I would greatly appreciate it! Thanks! crazycracker

Well you coulda fooled me! Why is there a section for it. At least I didn't use some random Fuck section like some of these Fuck tards! crazycracker

Well if you are being serious, that's pretty respectable I think. Thanks! crazycracker

Wheels or flywheel? crazycracker

Damn those figures are all over the place! I guess its back to the drawing board with this much confusion. crazycracker

I know someone on here has got to know there shit and could at least give me a guesstimation crazycracker

They are computer simulated dynos and I know they're not 100% but it will give a ball park! crazycracker

Hey guys just wondering if anyone has a desk top dyno and if you could check my engine on it? Here's what I got: 0.040 over 383 stroker 5.7in rods 11:1 compression pop up pistons (speed pro hypers) Edelbrok perf rpm heads 180 or 185cc? Windage screen 1.5 roller rockers Mighty demon 850 annular boosters World products Motown intake Camshaft as follows: Advertised Duration (Int/Exh): 295/295 Duration @ .050 (Int/Exh): 245/245 Gross Valve Lift (Int/Exh): .534/.534 LSA/ICL: 108/104 RPM Range: 2500-6500 Part Number: 10120303 Previoius Part Number: 07103LUN MSD ign 6al,pro billet dis,blaster SS coil 1 5/8 full length headers 2.5 in exhaust w/x-pipe & flomaster 40s If you need any other info ask me. Thanks for the help in advance! crazycracker

X2! crazycracker

X2 I thought the Clarke and 4.5 IMS tanks were nice! crazycracker

I've never even seen those ones before! Well between these two answers you should have everything you need! crazycracker

You can't see the cushions! They are located under the backing plate! You can check if they are warn by seeing if the gear and basket move independently of one another. A very small amount is acceptable, but if there is any, I would just bite the bullet and get a billet one! crazycracker

X2!! Very much agree with you there! crazycracker

I'm gna say carbs. crazycracker

If your thinking of getting a long rod crank might as well go with a 4mill LR stroker. crazycracker

Looking good! crazycracker

Yea I think they do! crazycracker

THAT'S SWEET! Keep em coming I want one when I have some extra cash! crazycracker

OUCH!! crazycracker

I'm crying inside! I want these so bad! Money is an evil bitch when you don't have any! crazycracker