Motooutcastxxx

PM Sent

PM sent on swinger...

I'd have to agree save yourself a shit load of cash and do it yourself. It's a much easier job than you think. Bottom End Assembly Walk-through: http://bansheehq.com/forums/index.php?showtopic=140912 Manual: http://bansheehq.com/forums/index.php?showtopic=150327

Send a PM to ellison445 he had a mint set of cases for sale (it's about the 4th page in the 'for sale section') , not sure he still has them but it's a great price if he does. You could also hit up NYUK that's who I got mine from.

Oh yeah and we shouldn't forget there's also a pretty easy to find thread titled "BansheeHQ Sponsors" which includes all of their contact info.

Getting ready to send my cylinders off to Jeff once I get my taxes back.. Bunch of good sponsors on here though. http://www.farmandsandtoys.com/

I would never buy anything from that guy, even before I became a member to this site and read a couple of threads about his shady practices. The fact that someone could have that many transactions and have below a 99% feedback rating means he's doing something wrong, seriously..seriously wrong. Just hold out for a nice set, shit you could probably find a set from someone on here, probably for not much more than what he's asking for 'em... And they'll be nice shiny ones too!

That doesn't sound all that bad, out this way the best place to go which is PowderTech charges $200 just for the frame...

^^ x2

There should be 2 per cylinder and they're located on the inside studs...

As long as a nut threads on and tightens up you should be good...

From the sounds of it I would buy it for $650 running or not... put the blunt down for a minute you could probably figure it out.

For $240 you can get the Kenda Bear Claws with wheels here; rockymountainatvmc.com Tires are about $76 a piece..

Thanks for the info... It looked just like the one I saw for a 2007 but I didn't want to say for sure just from eye-balling it, but that sounds right. Like I said a buddy of mine ordered a sway bar and they sent him this, if they didn't tell him to "suck it up" when he called to let them know it was wrong they might've gotten it back, all though I'm not sure how nice he was to them when he called. He was kind of counting on getting the right part... Anyway, last chance if anyone's interested. $100 shipped.

I would buy the Shee and ride it around a bit first before you go buying at least any motor mods for it, you might like it the way it is for now considering you're moving up from a Blaster, that's a pretty big step up. You'll also get a better idea on which areas you want to improve to help decide on mods. That's what I would do anyway, and I've owned a few Blasters in my day and the Shee is a whole different experience. Just sayin....

Couldn't agree more... this site F'ing rocks!! The thing is I thought I knew a bit about quads until I joined.. then I realized I don't know shit!! Many of the guys on here just take it to a whole new level! Talking about things I've never dealt with or even thought about....

You could probably pump the brake until the piston pops out but I usually just disconnect the brake line from the caliper and use compressed air to pop the piston out, just don't use a whole lot of pressure and WATCH YOUR FINGERS. It's also easier to loosen all bolts that you can when it's still bolted to the machine and it can be a little messy so make sure you clean up any spilled brake fluid fairly quickly.

If it was working fine before you don't absolutely have to get a rebuild kit but at the very least just pull the bracket off and clean all of the crap out of there so it slides again and you can still have it done today. Just be careful not to rip the boots, all though I've run 'em that way too but it usually makes it even more of a bitch later. I powder coated my caliper so it all had to come apart anyway.

This is the one I bought, don't usually deal with DK but once in awhile, Rocky Mountain ATV/MC might have them too and they usually have better prices, I've seen them on EBay also. https://www.denniskirk.com/moose/rear-brake-caliper-rebuild-kit.p1904928.prd/1904928.sku

If you look at both ends of the bracket where it connects to the caliper, there are rubber boots and that's where it's supposed to allow it to slide back forth. I know that's probably fairly obvious at this point, but I would say the next brake job I would just grab a caliper rebuild kit, you can find 'em for like $15 or so.

That mounting bracket on the caliper should slide back and forth too, if they've never been disassembled and lubed they can be a pain in the ass but it does move. I've had a few like that myself.

Let me try this again... originally posted a link for a kit that didn't include idle kit with it. You could also try a site sponsor at least one of them I'm sure carries them. Also RMATV only charges $7 for 3 day shipping.... http://www.rockymountainatvmc.com/p/43/53/218/727/604/1467/Motion-Pro-Thumb-Throttle-Kit

A C-clamp will push the piston back in, all though since it's apart I would replace the piston seals too, just because they're cheap. As for that little cap you're talking about I've run a few quads without them and it was fine.

I have for sale here a brand new front torque arm that I believe fits a 2007 RMK700, and I'm sure probably a few other sleds also. Please do not quote me on that even though I live in upstate NY I'm not much of a SledHead so I do not know exactly what it fits but I'm sure someone out there does. I prefer to ride in the dirt, when it's warm, all though sleds are a blast they're just not at the top of my list of toys to buy. Anyway, I'm selling this for a buddy of mine who ordered parts for his IQ Shift and was sent this instead which wasn't even close to what he ordered. Long story but he ended up keeping it, unfortunately there's no part number on it and if I remember correctly it's not listed on his receipt either but I will double check. I will try to get better pics soon. $125 Shipped. I know I'm a noob but I've sold many parts via the internet, whether it be on EBay or just out-right, if it'll make you feel any better check my FB on EBay I have the same screen name as I do here.

Never heard of them either... been ridin' since I was 12 and I'm 38 now.. RMATV is a bit cheaper though.