007banshee

Stock Axle for sale in good condition. Splines are nice. $35+ shipping.

Trails and starting to get into jumping. What do you use for checking degrees?

Should be getting my Fireball+ 2 arms monday or tuesday any tips suggestions for properly setting up my alignment?

If I wasn't waiting for my AArms and swingarm id ride. I live in Petoskey. Have fun, super nice area.

I lube everything pretty good too but it has probably 5-10 hours on it.

Have a set of stock headlights, no covers. Paint is a little rough but can be cleaned up. PM for pictures. $20+shipping.

Lookin for a nice stock front master cylinder for a decent price shipped to 49720.

FMF Fatties, Powercore 2s. Spark is good and blue. Ill ohm my coil this weekend. Plugs gapped to spec which is. 07 or 30mm if i can remember right. Thanks guys ill get ya pics soon!

Plugs are a little wet. Not drenched but wet. One plugs ring is thicker then the other, cant remember what plug was in which cylinder. Ill go up a clip and report back. Might be a week or two, but ill get pics and try another chop until then.

Hey guys. Complete rebuild on bike. Currently waiting for JL swinger and Fireball AArms to come in. Rode bike last week and it was fouling plugs. Here's my setup. Not sure if its airscrew or needle that needs adjustment. -Stock Head/cylinders bored. 30over -+4 timing -BR8ES plugs gapped .07 -900ft elevation at 55-65° -Stock carbs TORS removed -27.5 pilots Fatties/PC 2s -320 mains -1.5 airscrew -Uni Pods with outerwears -Clip 1 below middle. Needle has 6 notches? What brand? -32:1 oil mix with yamahlube. Did a plug chop before i took swinger and arms off. Only got to 4th wot and ran out of field. 2mm of grey line at bottom of porcelain. I will post picture's saturday of plugs. My top end seems lean if the plug is grey,not sure if i held it long enough tho. But i i cant get plugs to last a full tank, and i try to stay on it pretty hard,as it is a 2 stroke. Leakdown test was good and compression is about 125 on both. Running 93 octane also. Just not sure where to start if anyone can give me suggestions that would be awesome. Thanks! Nick

Also a brand new outerwear for a stock filter. $15 shipped

Hey guys. I don't have pictures but I can email or text them to you. Does photobucket have a mobile app? If so id happily post pictures if someone told me how. But here's some stock part's I have. -Stock reeds, good cond. $10+shipping -Stock swingarm. Can powdercoat any color. $25+shipping. -Stator plate $8+shipping. -Lower a arm bolts$ 5+shipping. -Stock Impelled$ 5+shipping. -Actuator arm$ 5+shipping. -Shift star non modded$ 5. -Shift Shaft w/spring and bushing$ 5+shipping. -YFZ450 tie rods in good shape. Open to offers as well. Thanks

Everything is sold......

I have a master cylinder from an '08 pm me

What is your elevation???????? Google your zip code..."12334 maryland elevation" or there's a link in jetting section. What's the current temps??

Ahhh. Thanks mole digger. Ill cut em tonight and report back.

A-arms $100 + shipping. Spindles$ 20+ shipping. Hubs/Rotors$ 20+ shipping. Brakes- Sale pending. Stuff needs to go. Looking for a+ 4 axle and stock front master cylinder....

$200+ shipping, everything except shocks.

Looking for a +4 axle in good shape. thanks

Im going to keep the shocks for now, so just a-arms, spindles, brake calipers and master cylinder. $300 or best..

Only picture I have on my computer right now, I can take more if needed. Thanks

Anyone interested in a set of yfz 450 a arms, spindles, and brake setup. Might get rid of shocks also. Asking$ 300 for a arms and other part's. $380 with shocks.

No i didn't even bother because nothing changed on the plug. I know to chop em. Ill try to find a longer straight away.

Have one on my bike,no issues. Most aftermarket covers don't even.come with a vent.