SuprSlow50

PM sent

X2 on being lean or an airleak. You do have to rejet for winter temps, depending on where you are located and how much the temps vary in the winter, will determine how much of a change needed. Another culprit could be that boost bottle causing a crack in the intake and an air leak. To check for this, spray some carb cleaner around the front of the carbs on the intake and if the rpm's rise then you have an air leak. Hope this helps. Wait...did you say you have a 230 main in it now and a 330 in summer and it ran awesome in summer?? You shouldn't go smaller/leaner on the main in the winter.

I just sold a set of DMC 916's... You can still get them here and on ebay I think. http://www.motorsportsofutah.com/index.php?main_page=product_info&cPath=12_13_59&products_id=349

x2 ...much better now!!

Inframes...He sent me some pics and they look really nice.

Good...I asked him to send me pics of the Trinity 2 into 1 intake and carb setup(for a buddy), he told me the carb was a 30mm and then later he said it was a 35mm, then tonight in the shout he said it was a 40mm carb.

If you part it out, how much for the front shocks?

IMS pegs sold...payment sent yesterday

X2...the more I see them on different bikes, the more I like them....Now all we need are the reviews to start!

I will take these, please pm me your paypal address.

If you are still looking for cylinders and pistons, contact "CAMATV" I believe he has a couple different sets that are ported for sale with new pistons. I sent him a pm as well.

If he takes the motor, I may be interested in the Lonestar a-arms, axle, and the shocks. Please let me know what you are looking to get for them, and also what weight/riding style the shocks were setup for. Thanks in advance and goodluck selling that beautiful bike.

Are you going to have them coated black? Oh yeah, I talked to Gary and he said it would be no problem to get the Shearer silencer tip on them if I decide to go that route, but they are smaller than the Sniper tip 1-1/8 vs 1-1/4..

That's what I figured. Were those pipes you sent pictures of bare?

Dave, you can always send me your other set of Snipers and I'll test them on the streets around my house!

Jeff did you get my offer?

Thanks, let me kno when you find out...I too am stuck with "20in" of snow that is really more like 48-70" with drifting. Not sure how bad you guys got it up in Geneva, but it was bad out here.. Hopefully some people in those warmer southern states or builders will test them out! I sold my pipes so I cant ride until I get another set!!

Why havent there been any reviews of the new Snipers by the site sponsors or anyone else for that matter? It seems odd to me that I cannot find a single review besides the one on Passions website. Anyone hear anything about them? I just sold my pipes and need to get a set but I cannot decide between CPI, Shearer and Sniper.

Bump...doesnt anyone have some for sale, or have you seen them forsale anywhere?

hey dunny, I never heard back from you on if the pods are 6" or 8".. I will still take them if you have them, so let me know.

To getting rid of the orange and.... to keeping the banshee!

These are the pipes you want....http://www.passionracingengines.com/index.html

***Inframe pipes***

I am looking for a nice clean set of chrome CPI or Shearer SMALL BORE pipes. Let me know what you have and what you are looking to get for the set of pipes shipped to 60441. Please send pics to udlose10@yahoo.com If you have black CPI's I might be interested too, so just shoot me some pics. Thanks

Is that the undercover model?