Turbo Chassis

Dyno sheet was posted in another thread.... I believe the motor made 107 but Shawn can tell you for sure

Unless your talking about the triple, but pretty positive the twin was done by mark Herek

It was actually built by mark Herek I do believe

thanks fellas shawn has put alot of time in that bike and its paying off for sure. also props to the owner michael reilly for a great setup

Call Shawn at currie motorsports 910-670-5245..... As green said Tim is extremely busy this time of year doing tune ups for his hunting customers

Here are a few times slips from currie motorsports /turbo chassis asphalt stock cylinder from this weekend.

Ttt

sold ?

I'm lookin for a 12 mm billet crank does anyone have one for sale? If so how much

Next year will be fun, or frustrating one

send them to shawn at currie motorsports....im sure you will be extremely pleased.....910-670-1422

top end sold.....frame still for sale as well as spindle mounts....there on ebay...heres the link reserve is 500.00 http://www.ebay.com/itm/banshee-drag-frame-home-built-wheelie-bar-swingarm-/121425544781?pt=Motors_ATV_Parts_Accessories&hash=item1c4586c64d&vxp=mtr reserve is 300.00 http://www.ebay.com/itm/banshee-drag-yfz450-trx450-drag-spindle-mount-wheels-5-8-spindle-mounts-/121425542805?pt=Motors_ATV_Parts_Accessories&hash=item1c4586be95&vxp=mtr

I have several nitrous bottles for sale. 9) 2lb bottles and 1) 2.5lb bottle 100.00 shipped per bottle if you buy 4 or more ill cut you a little better deal.

call shawn at currie motorsports 910-875-1422 he just recently became a site sponsor and can help you out...im pretty confident he will be able to matche the new cylinder to the old one so you only have to get one ported, although he may be able to give you more than you had for not alot of extra money as well.....give him a call and tell him you found him on BHQ

they were built for drag racing, bike ran fair races, 180-200ft tracks....very few 300ft passes.....hard to get an acurate "hours" when you are drag racing....takes alot of passes to get hours on parts. id say the bike probably went to 20-30 fair races and 2 events where there was 300ft tracks Chassis is located in belpre ohio

they are ported by dan @ a&s racing.....you can run whatever fuel you want.....these were ran on alky but doesnt mean they have to be

still have stator?

550.00 shipped on top end 500 picked up for chassis and parts 300.00 shipped for wheels and tires

Depends if it's for asphalt, dirt, 3 bar or 4 bar but they start at 375.00 shipped

https://scontent-a-dfw.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/285044_10150339206981745_1714148_n.jpg?oh=4159cd09218388e6f15e8c10645eee7b&oe=545E7D3F

I know someone tht has a set for sale they have smooth buffs on them, they are buffed super thin one of the tires leaks off he always just pumped it up at the beginning of the day. I'll see if I can figure out how to post a pic they are banshee taper and he wants 300.00 shipped

Heres a few things i have for sale: 10 mm x 68mm cub cylinders ported by dan at A&S racing, with domes, and pistons $625.00 shipped 5/8 spindle mount wheels and tires on a 10x2 wheel cut by ebarb racing with smooth buff tires $350.00 shipped also have a home built stock extended drag frame for sale that comes as pictured. Frame, steering, front hubs and spindles, swingarm, wheelie bar, radiator, etc. I WILL NOT SELL ANY OF IT SEPARATE. IF YOU NEED A WHEELIE BAR OR SWINGARM I MAKE THEM AND WILL BE GLAD TO HELP YOU OUT! I DID NOT MAKE ANY OF THESE PARTS AND JUST WANT TO SELL IT AS A PACKAGE! PRICE ON EVERYTHING IS $600.00 call/text 304-483-0472 or message me on here (im not on the computer much so your best bet is to text, thanks) TOP END WHEELS FRAME/WHEELIE BAR/ SWINGARM

Ttt

350.00 shipped

10x2 sorry forgot to add that