Josh Z

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=200565620884&ssPageName=STRK:MESELX:IT#ht_500wt_1182 if you buy them tell me you are a BHQ member in the note to seller and I will discount the buy it now price to $115 plus shipping. Then request a total.

This is cool so I have 18 cc domes with porting, and about a -2mm deck height and am at 5000' and i currently am pushing 160psi. so that would put me at 200+ at sea level? interesting.... Thanks.

That is pretty crafty! I bet that swingarm now weighs 20+ pounds tho! ha! I like those front plastics tho! and a great front sprocket! ha!

Sprockets are cheap as hell and easy to change out! get a good selection and try out different ones. I think right now i have 14/44 or 13/44. if you aren't using your 4th and 5th gear on the hill shoots then you need to loose a tooth up front (making it lower geared might make your front end come up easier but give it a try, I like to lean forward and spin hard off the line then move my weight back as I gain momentum to increase traction). your front sprockets make pretty drastic changes, however your back are minor changes. get close with your front then go up or down with the back.

Great buyer! fast payment and easy to get a hold of! Thanks!

Great guy! I feel bad that the item I shipped to him took damn near 20 days to get to him!!!!(Holiday season) But he was very very understanding and very helpful and decent about it all! (i would be pretty upset if it happened to me) But he was very nice and was very easy to get a hold of on here! Thank you 252wheelieking! Josh

$225.00 shipped! get them! They are in great shape!

I need a +6 brake line. let me know what you have.

Sale pending on flywheel.

Sale pending on flywheel.

I wish you would have seen them first too! it doesn't hurt to have a spare set!!!!!!!

I think it is about .015 deep at most. But you can easily refill it with jb weld and then sand it smooth and you would have no problems at all. we can do it for you if you need. They are in great shape and will run hard.

way too low of compression! a stock banshee I belive starts in the 140s and usually you need a bore job and new pistons and rings in the 120s or anything lower than that. AND. usually if you get more than 4-5 psi in each cyl then its bad news too. either you ran it too lean or you have a leak that causes that cylinder to run too lean. as for hard to start. yes. low compression makes you kick and kick and it just wont happe. Get a new top end put on it and do a leak down test. and make sure you jet in correctly for each place you go. it doesn't hurt to pull your plugs and check them throughout the day too. read the jetting help page if you need it. Good luck!

pictures are HERE

Ok. I have a set of stock cylinders, They are in great shape. they measure right at 64mm and they have wsm pistons and rings that also are in fantastic shape. I will post up pictures later tonight. We will throw a quick hone thru them and send them your way. These came off of a running top end. I did not get a compression test but I am pretty sure that these are some really really low hour cylinders! I would like to get $275 shipped OBO. That means or best offer! so make some offers!

a lot has gone on ebay. check it out.

some are now listed on ebay. ask if you are interested.

come on! this is a good deal. and they are easy to fix. make an offer.

come on! good stuff here and I'll take care of you! OBO means make some offers!

al-righty!!!! I just got the website all updated! check it out and let me know if you need anything not listed. I have tons of little spare parts too. just ask!

Thank you! I wish I were closer! I would do it for you! it sounds fun! it really isn't that hard!

I think I have all that you have mentioned so far. look here. jzitting.php.cs.dixie.edu/partout/

Frame sold

crank sold. The rest of the list is still available!

Thank you! we are just doing it as a hobby for now and to learn what we can! Thanks for the info!