Jump to content

toytech

Members
 View Profile  See their activity

  • Posts

    1,448

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by toytech

  1. toytech

    New Clutch ?

    toytech replied to DB87's topic in Technical Info

    down load a manual and do it yourself. Fast racing has a very good clutch, and the hubs and basket if you need them too. google search free banshee manual. or go to a book store and buy a clymers manual. theese things are easy to work on.
  2. toytech
    green would look good
  3. toytech
    uh oh mine was blown up when I built it then. still runs 2 yrs later though.
  4. toytech
    very true. sometimes you have to wait to get it done right . my cyls sat at Fast Racing for 5 weeks to get ported and bored, took him 3 days when he started them. well worth the wait.
  5. toytech
    he used to do that on the 250r motors to, they ran strong.
  6. toytech
    I agree false
  7. toytech
    thankyou
  8. toytech
    does anyone have the phone number for direct drive? I need parts for my lockup cover. and thier website doesn't work.
  9. toytech
    around 125
  10. toytech
    a cheata cub and 4mil crank. will give you huge gain, and you can always port it later. and you start off with new cyls.
  11. toytech
    I have a set of t3s they do not have any markings on them. we had them on a mild ported stock strke and they run well.
  12. toytech
    Looks good to me
  13. toytech
    I use toyota longlife coolant mixed 50/50 it dosr not have the silicates in it that eats the waterpump impeller
  14. toytech
    You needed to cut them off the front end you should have taken the rivets out and taken them apart and cut the outer and inner tubed the same amount and then put them back together with new rivets
  15. toytech
    I have simular motor and I run 16 f and 41 r with 21" hauler paddles at silverlake.
  16. toytech

    gasket issue

    toytech replied to mx1986's topic in Drag Forum

    why do you have mulyiple plates? if you use good quality gaskets it should not be a problem. you could get ahold of a shop that rebuilds air compressors they can get hard gasket material.
  17. toytech
    use silicone grease on the o rings and work them around, they fit. do not cut them.
  18. toytech
    popssibly an air leak, or throttle cable hung up.
  19. toytech
    talk to who is doing your porting. fast racing sells new kehins for around $350 a pair . I would offer him $150 at the most
  20. toytech
    our 421 with 21cc domes has 175 comp. you have low comp. you should do a leak down, sounds like an airleak on left side.
  21. toytech
    had a great time over the 4th
  22. toytech
    I know the tm carbs are a tight fit with the old fmf pipes. you have to angle them a little bit.
  23. toytech
    if you want to go fast!!!! if not buy a 4poke. and watch us all pass you.
  24. toytech
    all loaded up and ready to head to the dunes tomorrow,
  25. toytech
    shorten the silencer 3 inches, it will sound better

BHQ Quick Links

×
×
  • Create New...