forrest411

HAHA, I couple years ago I bought a basket case banshee in pieces becasue it had some nice aftermarket parts with it that I wanted for my other shee's. I was hanging on to this stuff until I finished a complete rebuild on one of them. Now that I'm done this stuff needs to go.

It must be a Premium member perk becasue the only tabs that I see are: Report, Multi Quote, and Quote. Thanks

Anyone know how to edit a post so that I can update the parts list on the original post?

Both grab bars are SOLD!

1 grab bar and airbox lid sold to tkiss1

Yellashee - $20 shipped for the bars

$55 shipped for the Grab Bar, airbox lid and bumper

It is the old style. There is a pic of it in the link on the post

I have a lot of left over parts from my banshee build. Prices do not include shipping. I will only charge what it actually cost me to ship any items that you buy. I'm located in Oak Forest, IL for those of you who may want to pick up parts. I will update the list as parts sell. So here we go, http://s1282.photobucket.com/user/mforrest411/library/Banshee%20Parts Stock Radiator - $25 Stock Carbs Complete with TORS and cable - $75 2 Chrome Grab Bars (excellant shape) - $10ea Alum Front bumper (not bent, but used) - $20 Complete front brake lines and hoses - $ Stock Cyl Head (excellant shape) - $30 Stock Cyl Head (pitted dome, not sure if it can be used or not, you make the call) - $10 Stock Reed Cages w/good reeds - $20 Shift Drum w/ shift star - $30 Shift forks w/shafts - $25 Airbox Lid (notice 2 holes that were drilled for vents) -$10 Left side cover (no cracks) - $12 Front fender brackets -$10 DG Nerf Bars (old Style) needs new nets - $30 Air Box Boots -$10 2 Coils (need boots, got them in a parts lot a bought) not sure if they are good or not - $10 ea Tie rod adj sleeves (like new) - $15 Complete set of front wheel mud deflectors - $20 Handlebars (no idea what bend) perfectly straight - $12 TORS with box - $25 Water Jacket that bolts to stock head - $5 Boost Bottle - Free w/purchase of anything else! Tail light (no mounts) - $10 Stock exhaust (missing one silencer)- Free to anyone who wants to pick it up! Chain guide (new in bag) - $5

What would it cost to ream out the brass bushings?. I only need 2 bushings reamed out

The reason I posted it here was because I checked with different companies and it seems that these arms use different size bushings and sleeves that any other arm on the market. I figured that someone may have run across this problem before. I guess I will have to find a machine shop that can turned down a stock set of sleeves to fit the bushings.

Nobody?

I have burgaurd +2+1 A arms on my banshee and I need new bushings and a couple sleeves. I have left messages for burgard and I never get a call back. The bushing that were in these were a rubber busing. The problem is that the inside diameter of the arm is smaller than the stock bushing and the sleeves that they use are also smaller in diameter. I found 3/4 brass bushings at the local hardware store that fit the arms perfect, but I cannot find anything that will work for the sleeves. I could possible drill out the bushings to accept the stock sleeves. Anyone know who I can get a set of sleeves from?

pm returned

Pm returned

I have been a member on here for a few years, but I never sold anything on ha. Have bought a few items but haven't had any thing to sell until now. I no longer need a third quad so this one has got to go. I do not have a title. With that out of the way the only things are aren't there is the motor, carbs, airbox, and rear caliper and break hose. All the electronics are there and everything works. The frame is straight, the a arms, swinger, shocks are all in good shape. It has a Durablue rear axle, pretty sure it is stock width. No cracks in the plastic, the seat has a gripper cover over the stock Yamaha cover. The gripper cover has 2 tears on the bottom. I'm looking to get $600 for the roller. I do also have a complete set of Toomey T5's that are in nice shape. I have pics but they are to large to post. I will try to get them posted over the weekend. I'm located just south of Chicago. Thanks

Got the brakelines, clamps and case saver yesterday, Thanks.

Are the front brake lines +2?

Sent you a pm

Cylinders $100 plus shipping

I was going to have the rod replaced on this crank, but decided to do a 4mil instead. One rod bearing went bad, other than that it looks fine. The gears will be removed before shipping. Looking for $35 plus shipping for the crank. I also have 2 connecting rods with bearings and shims - $25 shipped, Stock Reed Cages with 1/2 alum spacers $25 shipped. I also have a set of Cylinders that are currently 65.50 and need to be bored and honed - $100 plus sipping I will post pics shortly of the cylinders. Thanks Pics of the crank will be posted later Connecting Rods - $25 Shipped Reed and Spacers - $25 Shipped

Pm sent

Thanks for the replies.

What type of port o the 4 mil cylinders have?

How much can you bump up the compression before needing to weld the stock crank? Thanks