kawa110
-
Posts
3,662 -
Joined
-
Last visited
-
Days Won
44
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by kawa110
-
Damn
-
I want...760-285-7606... Hit me up Wait I have a 1999....same bolt pattern? (maybe dumb ? But isn't ther 2 patterns for shee?)
-
Had machine shop fit new weisco pistons and rings to cylinders(they honed)....starting to put together... Drained fuel didn't loo like premix to me!!! Going to pull bowl on carb and I'll post the engine mods and carb jet sizes...could use help ensuring proper fuel and tuning....
-
-
Ya air leak on left and right piston cooked, right reeds pushed back
-
Guess intake couldn't have been properly torqued...
-
Sorry I should have taken both pics same angle...these two pics same side(left) 2nd pic has pick bubble over hole... I put the little hose out of the water pump cover and the hose from the back of case into my soapy spray bottle I didn't see bubbles
-
Holes through intake mounting bolt holes.....
-
This leaking side finger points to hole Sorry upside down other side Ugly intakes Don't see cracks but it was bubbling
-
Trinity single carb intake off.....and..... Right side cylinder reeds
-
Ported to thin?
-
Got puller flywheel and plate off....pumped it....sprayed clutch side breather no bubbles.....losing 1/2pound in 2 minutes.....found this....left cylinder..... Found this on right but no bubbles
-
Just keep Swiss cheesing everything you add...use gussets...lol
-
Haven't leaked it yet cuz I figured I need be able to check seal behind timing plate....
-
Glad ur having fun..... Back to project on hold until I get puller lmao
-
Said use special not 3 jaw SORRY Dude didn't see how puller I had would hurt the flywheel
-
Allright it's off.... How did that hurt it???? Thnx for treating me like sh..
-
Not my bike but ya I usually don't use........hopefully not rusted on.....don't have fast puller(yet) trying my best to be carful with this....it's under extreme pressure and not popping going let it sit overnight and hopefully temp change will pop it
-
Do these filters "starve" carbs of fuel?
-
Thnx....I don't claim to be a mechanic I just love to turn wrenches on bikes.....
-
Waiting for sun to move to other side of house 111 degrees were I live..... Wat best case scenario...... Leaking intake? Worst case? ???
-
Got lucky with trinity stage 4 2 into one carb
-
What/we're is the easiest and fastest to get flywheel puller? The f.a.s.t. Model?
-
-
http://tapatalk.imageshack.com/v2/14/09/02/046a4c20f1e91f4e2eafbbf6234f6309.jpg[/img This one good?
