2strokesmellgud

Cable is new and re.lubed hahaha. If I can get this pwk off the clutch return that wud help as well. Great find I will be ordering that very soon 27$ can't beat that

Looking to make shifting a little easier. Already did the shift star mod now need the clutch perch I'm sure someone has one sitting in a box somewhere

I know this a super old topic but the instructions are dead on and that polish and sealer are the ssshhhhiiiiiiiiiiit. If u don't have any get some thanks for the post.

Sold thanks duster

Pre Xmas bump

Ttt

Check ur pm

Yes on both accounts 105$ for the intake shipped

i have pair of chariot reeds like new condition bought for my ported 4mm and now want v force they have less than 3 hours on them my loss your gain. going with v force open to trades as well ill do 105 shipped u.s.48 also have a polished graydon 2 into 1 intake 165$ shipped comes with 35mm pwk <iframe width="480" height="360" src="http://s40.photobucket.com/user/anthology1mill/embed/slideshow/forsale"></iframe>

Need upper chain roller and nerfs if u have them pm me

dammmmn

Thanks guys radar sold me a set.. BHQ is the $hit!!!!!

I have the same motor with pump gas domes pm me

ok radar sent u a pm this time

sent u a pm doobie

those are sold ttt.

thanks for the heads up

check ur pm ill take the rims just need paypal info?

found a good set of pro wedges but the pattern is totally wrong i cant even modify them so they will work. anyone have a set of 8s that will bolt to a shee

sent u a pm!

Payment sent for plastics.

http://i40.photobucket.com/albums/e231/anthology1mill/IMG_20140826_0723081_zpsdc580b2b.jpg best pic i cohttp://i40.photobucket.com/albums/e231/anthology1mill/IMG_20140826_0722071_zps12610315.jpguld get with the http://i40.photobucket.com/albums/e231/anthology1mill/IMG_20140826_0722391_zps5fe6dd8a.jpgphone u can see the dark area where the hole is, not very big.

<a href="http://s40.photobucket.com/user/anthology1mill/media/IMG_20140825_204753_zps5bc91e94.jpg.html" target="_blank"><img src="http://i40.photobucket.com/albums/e231/anthology1mill/IMG_20140825_204753_zps5bc91e94.jpg" border="0" alt=" photo IMG_20140825_204753_zps5bc91e94.jpg"/></a>

Yes sir you are correct about that i will inspect my parts from now on. The reason my bill was only 300 was because he felt bad he couldnt get it running for me. Adrenaline rush in panama city.... the reason i sent the cylinders elsewhere was due to the fact that i figured it was my head that was the culprit not the juggs. I never wanted Dennis to fit the bill a simple crank would have been nice but he did what he thought was right he gave me a USED juggs that are 65.00mm. Yes the deal sucked but like you said i learned a lesson. FYI i probably would deal with flotek again just not porting my banshee. 1400$ covered used juggs 64.50mm dune ported new 4mm welded crank and full rebuild top to bottom oh and pancake bearing

i checked them afterwards they wer the same ones. and no im in FL. And befor people say im jumping on DENNIS.He is a pretty good guy to deal with he didnt have to give me the used set of juggs. but with all that said look at the difference in port work. Im no expert but clearly the old set doesnt look anywhere near as good as the other builders