PACIFIC NW BANSHEE

That is gay to the third power

Wow lots of anger here i think we have all been here in way or another .This is nothing new pay the fine and realize that it is the luck of the draw .You did something that caught his attenion and these rangers/cops deal with every fucking tool under the sun did everday you ever think of that .I have been there suck it up and move on and to everybody who thinks fuck the police just remember that when your house gets broke into or car gets ripped off or one of your loved ones get hurt.Dont call the police and waste my tax dollars because you dont like the police and what they stand for.Before you hate on the police realize that this is somebodys brother sister father husband son daughter that put there life on the line everday to protect and serve .MY UNCLE DIED IN THE LINE OF DUTY IN JULY 4 1984 DIRECTING TRAFFIC AFTER FIREWORKS DISPLAY IN UTAH DRUNK DRIVER RAN HIM OVER .So pay the the fine and get over it!!!!!!

Just my opinion i think http://www.smimotorsports.com/ has some of the best prices around beat cacades prices every time on wheels and tires .

Check craigslist around where you live should help you establish a value.And in my opinion if you want try and raise the value ditch yellow seat cover and get some cheap black cover.Detail the piss out of it you already have a good color plastic black

Ok i know you said billet but the billet holders suck in my opinion .I run what is called a firestix nice heavy duty pole and on spring that bolts to your grab bar .They cost about 30$ dollars but worth it

Yes i know of the company it is owned/run i beleive by charlie brown.I have machine work done by him as well as other people i know .The quality of his product are good this is a one man operation for the most part hard as hell to get a hold of him .

I guy i worked with a few years back said when his pipes were new he had them ceramic coated on the inside to keep heat down and the blueing .Now i dont know how true this is to me it seems like it would be hard to get a good coating inside ??

Here is my two cents save your money and buy the best tire you can .Both tires you have in mind are molded one piece tires that are heavier than say skat trak haulers.Heavy rotating mass not so good I have never seen sand trax on any bike in the sand out here on the west coast . good luck

Yeah $75 dollars if you buy my rear shock so close to new it is not funny one ride on it off a 2005

YOUR MOM CALLED IT IS PAST YOUR BED TIME !!

OH YEAH WHAT YOU RUNNIN

Not a problem good luck in your search let me know if you need any thing

That bike has been on the medford craigslist for some time i dont think the guy is going to move on his price.Save yourself the headache and drive north to portland or eugene you will get better deal there are two pages on the portland craigslist good luck

Yeah i here yah i dont know with out sitting there and trouble shooting it myself .

I am looking at the wiring diagram as we type .And i typed black and yellow when it is the black and white that goes to the cdi .It is just hard as hell to trouble shoot things with out being there in person it could be a bad cdi ????

I say bead blast them but as far as high temp paint .I have never been able to find any over the counter hardware paint that will hold up to the level of heat that header is going put out .So if you check around you can find high temp powder coating that you can do yourself and holds up a little better good luck

My bad i have been drinking a little i steered you in the wrong direction .check the black and yellow wire between your kill switch and cdi unplug from cdi and set your meter to ring if it does not ring wire has a break in it that could be your problem. Or check the black wire on your kill switch to ground with a meter if it does not ring out that could be your problem .

First off do you have a meter and a manual .Second if you do not you should borrow a meter and manual.My best guess as far as what the problem is a black ground wire some where in your harness is going to ground and when you turn off the switch you still have a ground wire backfeeding your coil and causing the coil to still get power .So start by looking for a bad wire check your lite bulbs anything that can back feed your system .

I dont think there would be any problem with the crank being out of balance.Think about like a wheel on a car when they add weights they dont add them to the center of the wheel they put them on the lip of the wheel .The further you go out from the center of the rotating mass the more effect it has on balance.So if you bent/mushroomed the end of the crank and it is near the center of your rotating mass should not be a problem.And you can buy a die and rethread the end of your crank i hope that helps

I use the green bar from sears and get a nice finish on my cascade parts .Just got done polishing some parts i am going to sell .And i use a 3/4 horsepower 3600 rpm motor works good after you get done with the polshing wheel hand buff them with a microfiber towel and a product like simichrome polish or what ever you can get your hands on

they dont look like they are for a banshee . So if they dont work for you oregoncalfroper i have set of nerf bars with red webbing.Where are you at in oregon good luck

Way to much for my taste

We must think alike pic of my rear brake setup with fins ground off .My next trick is going to do three dimples with a drill bit just to give it a litlle something else everything looks good .

I would assume that you are litlle older than terror .So you should stop and realize some time somebody needs to take the high road.And know his comments were not the best choice but when kids/teenagers log on to websites they learn by example .So if we dont show the younger generation how to act or have proper internet etiquette it will only get worse

Dont listen to these people and dont lower yourself to there standard.To the people who jump all over a person for there grammar does it make you feel like a bigger person??It is really easy to sit behind a keyboard and bash on somebody it is shitty you people should stop.There are better ways to get your point across try it some time .And remember some of you higher members represent this web site and some are not doing a very good job