PACIFIC NW BANSHEE

All parts have been shipped thru usps .Thanks

Was revalved for 185 lb rider and was on six over swinger .

SOLD PARTS ,Water pump , bar clamp , grab bar, SOLD

All prices are shipped billet bar clamp $15,clutch case insert $15 , water pump cover no bolts $25 , chromed upper front plastic suport $15 , chrome rear grab bar $35 , lonestar steering stem use larger handle bars $200 , chromed clutch side case scuffed and scratched $65 , rear shock with eibach spring $135 , rear shock with eibach spring revavled by devol $200 , direct drive lock out and assy complete scuffed and scraped $185 , billet stator cover $170 , mod quad bumper needs polished $125 ,

can you here me now

I have two extra lock outs assy one is direct drive complete the blue one has scuffs scrapes and is used but complete and includes lockout $235 + shipping. The black lock out is a mod quad lock out and includes lockout needs water pump and cleaning but is in good shape $235 + shipping

? ygm I dont text

Just cover no lock out quote name='Badasshee' date='13 May 2010 - 11:34 PM' timestamp='1273818871' post='1130017'] lock up come with cover or just cover? You are correct wont fit lock out under it but this has had a spacer machined for it wich will allow you to fit a lock out under this one wich comes with it .

I have one +4 billet aluminum swing arm that is not perfect has been welded on and the cross tube where the swing arm bolt slide into is slightly bent you can still put the bolt in I personally never used it took in a trade .The swing arm is not perfect but a cool piece asking $175 + shipping .One nice billet sfb clutch cover $370 + shipping

$35 dollars

i guess but you have to pay for shippimg

Yes it fits stock axle and it set up for linkage The whole setup $200 + the cost of shipping

Honda style I can make you a deal on the carrier and the swinger

Sorry about that carbs are 34 MM

So i have few used pieces here first mikuni tm flatside carbs with dmr powerjetshave parts to convert back to gas $195+shipping .Second a dmr 2-4 duneable overide trans $250 +shipping .Third a +10 swinger with wheelie bar brackets on the bottom paint is rough dont know who built it $165 + shipping . If pic are gone parts are sold

cc 19.705

Yes it would fit no machine work .But I sold the piston and the cylinders I do have another set of cylinders that have been ported by hole shot .

A better deal realy come on are you kidding me those prices are already cheap cash talks and bs walks this set up new would cost around 2 grand .As for the porting I am no expert and I cant remember what the guy told me ??

I have one for sale check it out in the for sale section low ride time like new

Yeah it is a 115mm long rod has #158 on the rods

Dont know cant find my calipers

I forgot one thing about the crank it needs a new rubber oring on the bearing on the flywheel side

All parts are used but in good shape the crank is welded and bearings are good $295 + $20 for shipping .The cylinders are ported and bored for 64.5mm was told porting was done by LR racing ? I think it was more like LRD but dont know for sure the polishing on the out side needs cleaned up $300 + $20 for shipping .The piston are clean and ready to go 64.5 mm $40 + $10 for shipping .The head ismilled for 4 mil crank andis in good shape needs some polishing and needs new o ring kit $110 + $15 for shipping Thanks

So I have two very nice shocks here the first shock is a stock set up with a eibach spring part #891.0089.1 was on a six over swinger and is in good shape $135 +15 for shipping .The second shock has been revalved by devol and has a eibach spring part# 891.0089.0 was on six over swinger was valved for 190 lb rider and is great shape $235 + 15 for shipping .I take pay pal . NOT TAKING OFFERS AT THIS TIME