#1JUANstunna

Compression testers have check valves in them they won't show if there is a leak. Leak down testers actually use compressed air to pressurize the cylinders and crankcase. Tighten the chain loosen the two carrier bolts that hold the carrier to the swinger. Then adjust the two bolts above the skid plate evenly . Then retighten.

Savage told me that everything will work with the stock intake and airbox

Ok I like it.

Do you or your buddy have a leak down tester? Check and make sure you don't have an air leak at a crank seal or intake gasket. Also check and make sure the boost bottle hasn't tore the intake boots.

How did you do that?

I mix mine 50:1 Bel Ray MC 1 and use Premium gas. Bad gas will kick your ass every time. Get a baby bottle or something with oz. on it 50:1 is about 2.5 oz of oil per gallon and 32:1 is about 4 oz of oil per gallon. I just eye balled it on my ratio rite cup.

If it's back firing then it turning over just not starting. Timing or it's lean. Did you hone the cylinders? Not trying to be a smart ass. Did you put the choke tube back between the two carbs? If it does come off by hand that's a problem too.

Remove the shifter, then the black plastic cover and there is your flywheel. It takes a special puller to get it off. Dont use 3 jaw pullers or beat it off.

After I reread your post, what was the reason for the top end failure? Just wore out?

Pull your flywheel and make sure the key isn't broken. That's the only way your time could be messed up.

Savage420 runs a set of 30mm that he really likes and I think Im going to put on mine too. http://www.carbparts.com/index.html# Call them and tell you what you have they are around $200 comes with cable also. Their on eGay too. http://cgi.ebay.com/ebaymotors/30MM-D-slide-Carbs-for-Yamaha-Banshee_W0QQitemZ230391184180QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item35a4627b34#ht_500wt_1182

Chris- Savage420 is great to buy from! I bought a filter and outerwear from him and it was just a described. Highly recommended! Even though he is Canadian! :biggrin:

Mullica Hill, NJ is where the phone number is registered to. Someone in the area go check it out for these other fellows.

I need it. I'll get with you tonight, I have to wait a couple of days for my new bank acct. to be confirmed thru paypal.

Bump......Let me know when you are ready to sell cheap!

Hook me out with the K&N and the outie for the airbox if you still have it.

Bump for a really nice Shee

Worth a try..............BUMP

Give ya $250 for cases and trans. shipped.

I like it. Count me in for a Lg.

That's twice as much as I give for my 99 last summer, but I guess since it will do a 100 mph that makes it worth more. :down: Dumb fuckin' people

Oh shit that's funny! :laugh: :yelrotflmao: :laugh:

Delete x2

PM sent

Mine did the same thing. My crank started to come apart. Take a wood handle or stephoscope (sp?) and put it where you think the sound is coming from and put it to your ear. The noise will be easy to hear the close you get to the sound. That will better help you pinpoint the noise.