uwenr

These are on 8" wide rims

Anyone both sets are sls

I'm looking for 22-11-8 12 paddle, I have 22-11-8 10 paddle. I have to sets 1 on 8" wide rims and 1 on 9" wide wheels

I'm looking to buy 38mm intakes for a banshee.

I have 2 sets of ten paddle haulers, not extreme thou. I would sell I need more paddle. 1 set is on 8" wide and the other is 9" wide

They have a myspace account http://www.myspace.com/330243636 with lots of pictures

The map is not exact but close. 85 into Gila Bend, right when you get into town take a right on Old US 80 then an imediate left on Stout. Down a couple of mile past a stop sign there will be a sign for a sand ans gravel company turn left on the dirt road . It zig zag to the northwest you will come to a sign for the company again turn north and go around the yellow gate and follow it down to the river bottom. Park up top if you dont have a four wheel drive sand is very very soft.

map

We go out about once a month. Its not the same place as 2000 geez thats a long time ago. Sun Valley parkway north to mile marker 118 about ten miles north of I 10, theres a turn lane in the median turn west follow that down to the river bottom about a mile and a half. Will start grading the track about 630 water and race around 8 to 9. If your from the northside Bell turns into Sun Valley Pkwy much faster

Anyone?

Sand drags next weekend the 21st at Hassayampa river bottom, then the following weekend the 28th in Gila Bend.

What are you mixing the oil at, alcohol takes alot more oil 20:1, and whats the timing at lower timing for it also like +5 or +6

The switches on the handlebars is a ground type just like a dirt bike you can unplug it and nothing happens, the key is a loop if you want your bike to run you need to loop it together. I just got rid of all that stuff on my bike, wired the lights without a switch and took off the switches on the handle bars, just have to kill it with the clutch. The price you pay for a lighter frame.

I'm looking for a ladder type swingarm +10 or +12 chrome round carrier.

Had the same problem it ended up being the little tabs on the bearings didnt line up exactly in the cases and a little drag when all done. Long story short ran it and found out the hard way 4 hours away at the dunes after 10 minutes of riding.

I have a sleeper 7 mil on alcohol with stock carbs, stock jugs, and stock head and it rips. i'm sure it would be alot faster with big carbs but when I race everyone looks at my bike and wonders how its so fast, its great!

What about the intakes, if so how much for the carbs and the intakes?