Building my First

Take a look at this negative feedback and decide. He did not have them listed but replied to my wanted ad. Do the Seller's Rules still apply? http://bansheehq.com/forums/index.php?showtopic=129625

He must be blind. Bought some wheels and tires from him. I know I fucked up and only got 1 shitty picture. I spoke with him over the phone and was told, they are still nice and in good condition. Tires were said to be like new and they are close, no complaintes there. The rims he said had a few scratches and a few small dents. I specifically asked him if the lips (is that better goonie?) were all beat up and was told no. I received them in much worse shape than he told me. Gouges, kinks on the bead, scrapes, slightly wobbled out lug holes, and a flat spot on one lip. I am disgusted, I was civil with him, tried to get a partial refund but no dice. Here is a link to our PM's, if you care to read. http://bansheehq.com/forums/index.php?app=members&module=messaging&section=view&do=showConversation&topicID=136616&st=0#msg1065561289 The one picture that I foolishly settled with. What they really look like.

You should pm one of the builders. Just look at the sponsors and send a couple messages.

I don't think there is too many dunes in Illinois, so I guess you're mainly trail ridding. When your talking about the frame and your not running a skid plate, Powder for sand/show, Paint for trail. You could powder everything that doesn't get rocks flying at it. For me the frame gets paint, powder chips way too easy when a stone hits it at 60 mph or you scrape frame from hitting some rutted hill climbs.

Shoot me a pm. It would be nice if I didn't have to convert the stator. Do they make a 4" square or 6" round for ac?

I am talking about the 6" round, with 6 10 watts. http://www.visionxusa.com/oscthumb.php?src=lLzczdrZ3JLVxd7Q6Nfd1pSftLCix5-UlYOetsO5sJK9nLuZxqqak5ey3M3c4pfN1bo.&w=1000&h=&fltr[]=wmi|/phpThumb/watermarks/vxusa-watermark.png|C|60|0&f=jpg&q=95&hash=2024cd88b0a1d5c110b215d403c1fd73

Looks nice. I'd like to put the 6" one behind the bumper between the a-arms. I'll wait till the prices come down some.

There must be something off on the carbs. Are the idle screws in enough to have the slides off the bottom? Are you using the choke? Sounds like you really need to do a leak down test, you might have a massive air leak.

I've sold enough stuff, figure it's time to make a permanent link.

I've sold enough stuff, figure it's time to make a permanent link.

My paypal is aj_pressley62@yahoo.com. If you transfer fast I will have it out in the am. You can see where the steels made contact but there is no grooving.

I have a nice one, $25 shipped, will get a pic for you tomorrow after work.

I have a good one with a like new 45 tooth sprocket. $45 shipped or $25 shipped for just the hub. I will get some pics tomorrow after work for you.

It was used for about two months, still looks new, threads are perfect. The cheapest I seen them for was $35 shipped. I think it was a RM plate so it's Canadian parts.

J-arms are getting rare, I wouldn't put any added stress on the balljoints. I have a good pair with red spings I'll sell for $50 shipped. PM me if your interested.

I have a set off my 2000. The ball joints, sleeves, bushings, caps, and tierods are all in good shape. I ripped all the damn boots on the arms getting them off the spindles. A new set is $25 shipped off ebay. They have some shitty yellow paint over the stock silver but they are worth cleaning up. $100 shipped. http://s636.photobucket.com/albums/uu89/aj_pressley62/Banshee%20Part%20Out/?action=view&current=101_1649.jpg

Really? I never noticed any say one broke, the stock ones are cast. Let me know.

I f you change your mind I have a like new cast one for $25 shipped. You can hardly see the bling of a billet one with the flywheel mounted anyways.

Are the rear tires on the wrong sides?

Just like the title says. Need front blue labels in good shape. With sand tires or no tires, maybe even junk tires. I just need a set for my front sand tires. Send me pics. I have parts if you need something for trade.

Stock motor=BULLSHIT. Toomey T6's are made for stock porting but there is no way in hell he would beat your bikes. Stock carbs will make high hp. I'm sure he had a +4 long rod crank maybe bigger, shaved stock head, advanced timing, poted cylinders, and good reeds for stock cages. Sounds like one the assholes that ruined Banshee Wars. He's just rolling around under cover stalking prey, I'm surprised your story didn't begin with you losing money racing against a well tuned stock motor.

They are the same as stock carbs just bigger. Stock is a 26mm VM. You would have crisper throttle response with flat slide carbs but VM's are ok.

You should now better than most, the stealership fucks you in the ass hard! I don't buy shit from those fucks, unless I need some hardware.

He purchased some nerfs and a skid plate from me. Paid quickly. On the other hand there is a very big difference between a new guy buying and a new guy selling. Posting good pictures goes a long way. I hope you are a good addition to the forum, we don't need anymore douche bags on here. Good luck with your sale.

I like the idea of them, compared to the stock rollers. Do they work? Are they noisy?