lowbuckracing

How much for the 7 piece billet set....PM me,Thanks,JB

Post on ebay and take a small loss....

:biggrin: ....x2

Since everyone is looking to do a calendar...post up some pics!!!!!Lets get it done for a 2010 Banshee only calendar.Hot girls on Banshee edition for the garage and a Clean one for the family... Draggers,duners,mx,trails.....Lets seem all....

That is gonna be one sweet ride...I bought my 5......

I just looked at the pic..I got it now..Thanks,JB

How much for the bolt on silencers?

PM sent

How low of compression?,The spark would still be strong with no pistons attached....What is the gap between the pickup and balancer?Check your ground wire on loom?Good luck.

the toomeys are good,what are you changing to?

Ive ran a prototyype for the 250r atc for him...he is a awesome machinist in moreno valley....All his domes are interchangable also....He does motor porting as well,nice guy.He likes doing the single head for each one so you dont have a uneven surface when you tighten it up....

I have some chrome a-arms upper,lower,and both sides for banshee. pm if interested.JB http://cgi.ebay.com/Banshee-A-arms-chrome-...%3A2%7C294%3A50

I have A-arms,chrome to trade,Both upper and lower both sides...LMK http://cgi.ebay.com/Banshee-A-arms-chrome-...%3A2%7C294%3A50

Nice lil ripper,wish I had some lettuce to throw your way...

tape a straw or something to a vacum and try it that way,aircompressor with air fitting to try and blow it out,small wire and fish hook it.......

I had one on a 10 mill trex and it worked great... I also have one going on my 4 mill alky motor,The only draw back is no lighting....Its strictly for drag bikes,banshee wise anyway....

There is a boost bottle on the hq raffle bike,We are using it as a governer so the winner gets used to the power,then his or her first mod can be to remove the boost bottle...LOL :thumbsup:

Chain lube .for the chain.....Drain the oil out of motor and replace with oil recomended by manufacture.checkcc for recomded fluid allowance or a quart of 10 /30 motor oil is what I use..find out if he has ran synthetic oil in it before or not,for the gas and case.Dont mix them up.run your gas at a recomended 32-1 to ensure your engines safety..I always mix at 40-1 klotz,but yamalube has never failed me either..clean your air filter with soap and water,wait untill it dries and spray with a filter spray lightly.It goes along way.Always carry 2 spark plugs and a wrench with you, b8es plug size.drain radiator fluid and fill with a premixed 50/50.for your starter,contact fast racing or Jeff here on the HQ to order you a rebuild kit for your kicker.Good luck and have fun on the 2 stroke!

If someone goes out early reseve 3 rv parkings for me....Let me know so I dont have to drive back and forth from washes to hangout...plus I wanna let everyone check out the hq raffle bike......and raffle it off at gecko...thanks..JB

Beau iz a cool cat and these pipes are well worth the dollars....Bump!

Save your money..A 4 mill guy will be stepping up to a bigger motor and selling his set up...Thats if your trying to save money...If you want new stuff then just buy a part at a time and build it over the year,you can also put a wheelie bar,tires,and go drag it stock...its till fun!If you are bracket racing then your all good,just be consistent.Ive seen the biggest turds win bracket racing!!!good luck and have fun.

What kind of ridding do you usually do? :yes:

try a reverse drill bit first to try and back it out..Make sure its a smaller od then your tap so you dont mess up the threads..

glamisinfo.com they have the weather and all kinds of up and coming events...also some good pics from all the major holidays

Sounds good..Just pm me...