lowbuckracing

pics and a phone number to reach you...1500 seems pretty cheap for a 10 mm..

How much for a sponsor spot on the T-shirts..Im sure a few guys wouldnt mind having a lil extra advertisment..

Red xl-Short Sleeve

Before and now still handing everyone exhaust

As far as the build goes.....Frame is good to go on paper work..Grizzly had the cases ran through CHP and they are clean...As far as parts now,Austin and Chad will be posting the rest of the parts needed..Everything that Tim and I can think of for the most part should be on the way to them and anything that is needed will be posted as soon as reasembly begins on the welfare build..I would like to thank everyone for hooking our brother up..If you wanna donate some funds for the build to help pay for Topend,registration or other misc things pm Tim from Stellar Machine and Performance "Azcustoms" here on the HQ..thanks,JB

By lowbuckracing, shot with Canon EOS DIGITAL REBEL XT at 2009-04-09 Or trade for ?Thanks..JB

Hq always has some extra love for our brothers and sisters...God can work miracles...Amen

Kev is no Hack...Ive seen his work first hand..Bump for a busted up cylinder..LOL

still need a clutch kit..fibers,etc...

buy the RDZ style chain roller,I think it runs off your foot bolt... http://www.rdzracing.com/ 512-521-1317

Lmk how much shipped and pay pal included..Or trade my coolhead style studs for the stockers..thanks,JB

There are a few stores on your way through Brawley you can buy them at..there are signs out in front of the little liquor stores and stuff on the way..

I think Kev from HJR is trying to make it too..also have some of my other friends rolling out...Should be a nice lil group...If you guys can make it,roll out and have some bbq with us,do some ridding and watch Pablo do his new song form his hit record.."8 plate"..

I believe the only things missing are some 66mm pistons and rings,a gasket and seal kit,and some miscelanous stuff that Nyuk could prolly handle.. pm me for shipping addy when your ready to send this stuff off.Thanks,Lowbuckracing!

sweet..Thankyou...And to everyone helping out..I wish the hq build would have come togother this fast..LOL

Thanks to all the guys jumping in on this....So far this is what we have.. Grizzly700- Engine Cases Azcustoms-Cylinders Onesickcrewcab-Coolhead,Tranny,Clutch Basket and ring gear Nyuk-May have the hardwear for the cases Duneman101-Stator Cover,Clutch Cover minus the water pump shaft key&washer Lowbuck-Carbs,reeds and cages fouldout421-Clutch kit with FZR 1000 fibers,Hd springs,crank gear,pin and washer for water pump,cross over tube and intakes,sprocket and nut BBCmudtruck-crank and rod stock stroke moneybags-base gasket Things that are still needed Full gasket and seal kit kick starter filters and outerwears for stock carbs 66mm pistons and rings If you have anything for us let us know so we can get our homeboy rolling again...Thanks guys!!JB

He said "hard times" and dvd porn in the same post..LOL

A couple of Flyhighprerunners friends here on the HQ have got together and made a full roller for our hommie Austin,If any of you have met or dealt with him he has truly been one of the cooler people I know....We are looking for a motor to build for him now,The motor that was gonna go to his build never showed up" The Brandon Orr" No show Job!Im looking to build a complete motor with all your help.Im looking for a complete stock bottom end or a nice set of cases to start..We have got very little money to spend due to tight times but we are willing to pay shipping for any good parts to complete this build.Thanks,JB

Still need studs,dont have trading stuff but good ol cash

pm sent..

Need stock studs for stock banshee head..

You will need a 4 mill crank,A cub cylinder ported for the 4 mill of your choice,pistons for the 4 mill,domes cut for what type of gas you are running,carbs,filters and intakes to feed the new build,Adjustable stator plate if you want it to run top knotch and the complete gasket set for a complete engine build.Just a few things to think about..You can also put a 4 mill crank in your stock cylinders and have it ported for the new crank,run stock carbs with bigger jets,have your stock head cut for the new pistons youll be buying and run the piss out of it..If your gonna talk to a pro about it call Kevin from HJR and he can point you in the right direction.760-815-1316..Kevin..dont tell him Lowbuck sent you or he will tax you for it..LOL

Click on Images to enlarge $145 shipped including all paypal fees...This is a great upgrade if your looking for a lil more pop.Complete coolhead with 19 cc domes,also comes with stud kit!I will trade for your stock studs.O-rings are in good shape,used of course.Went to 4 mill on duner and this must go today!..I will ship tomorrow..Thanks,JB

sale pending on bansheerider87..

45 shipped...