notsed

more than happy with the price, shipping and service cant wait to buy more off you

pm sent

looking for a set of pipes any besides drag in any finish good or bad with no dents for a cheap!

anyone have a kickstart lever to get rid of? my buddy lost his this weekend, all he really needs is the top half the bottom part is still on the bike lol thanks

anyone have a kickstart lever to get rid of? my buddy lost his this weekend, all he really needs is the top half the bottom part is still on the bike lol thanks

pm sent Trinity Stage IV Cool Head w/21cc domes (includes the acorn nuts shown in the pic above) and new o-ring set $160: VForce 3 Reeds and cages: $150 Set of all three above: $420 Clean case set, no chain whack, a little surface oxidation on the outside; $150 Stock clutch basket with adjuster (not shown) ; $60 Stock crankshaft and connecting rods: $115 Tranny with bearings: $115 Reed Spacers (5/16”) with screws: $20 Stock cross over tube: $15 I think the prices are reasonable but if anything is out of line, let me know.

as the title says must be in great condition thanks deston

hello, i need a good condition trued and welded stock stroke stock rod crank, a nut for the front sprocket and a swing arm bolt. can anyone help?

hi all, my current set up is fmf hi rev pipes, +4 timing, no air box. running 280 mains, needle on the middle clip, 25 pilot at 600ft. im going to alberta which is roughly 4000ft what should i be at to get it close before i go, temps are going to be about the same with a lil less humidity? any help would be great thanks.

need the nut that holds the front sprocket on and the lock washer that goes with it. thanks

thanks for the help everyone, i got what i needed. the hq makes things so much easier.

got any pics?

hello, i really need a set of good cylinders with pistons ported or unported and a stock head. shipping will be to ontario canada, please help!

i have a 92 rolling chassis if your interested, its in good shape and you can have whats left of the motor. you can check out my add on kijiji windsor, its the blue and white one for 900. im willing to go a little lower on the price. all the parts are there for it. the pic for my avatar is from last year when i did a complete rebuild on everything.

hey, i need a stock inner clutch hub or the whole assembly shipped to windsor ontario canada n8x 4n6. if anyone can help that would be great thanks.

mine will never ever start at wot even flooded

ive been looking around the site reading posts about namura pistons and everyone is saying to go with wiseco, wich i understand is a proven product compared to compared to namura. what i want to know is if there is anyone on this site who has used them and had them fail whem the bore was the proper size. the reason i ask is im laid off and need a reabuild but cant get the good stuff right now.

what about the fact that pro lites need a .004 clearance and namura needs .002

as stated i need the stator side stock cylinder under 65.5 with stock port, thanks

how much for the intake shipped to windsor, ontario,canada, n8x 4n6? i found a crank yesterday. thanks

hi, im looking for a stock crank 110 or 115 in good usable condition along with some intake boots for stock carbs. can anyone help? thx

whats in the engine for mods if any, and how is the condition?

i have a set of stock unported jugs that are at 65mm in need of a bore, a stock crank in need of a rebuild, a stock head in good shape and a blue charriot head with no domes. i also have a good working tranny out of a 96 with all the gears,forks,drum and modified star. if anyone is interrested in any of this stuff just let me know and i will get some pics and we can work out a price.

ive got a set at 65 that need a bore