xXBlessedWithDeathXx

part cut pics sent. i need your address.

I was thinking of buying one. not to hold plugs tight, i dont have that problem but for a wrench. its billet and has a nice look to it. i think i still might get one. does anyone have close up pics of the plug lock? does it have the 13/16th head on it or is it some type of lock?

why not just run 22". a simple sprocket change will bring your power back. primary sprockets at GAP for 13 bucks.

your right i shouldnt have. i just got the bike running. it was the middle of winter so there was lots of snow. i was all excited to ride. i decided to take a ride to mickey D`s and shoot down the highway to the next town over and come back. i messed up i know this but i stop cuz i had no where to go. every thing was snow but the roads. i`m not gunna argue with you about it and i`m not bitching about the my license or fine. i know it was my fault. that was 17 years ago. i`m not even exactly sure what my point is. i guess i have no point but thats my story.

Hi, my name is Jack and I ride without a helmet, i ride on the street, i drink and ride (often), i ride on highways, i ride on private property, yes i trespass, i smoked and rode once that was to much for me so i dont think that will happen again. i`m a 1%er they got me once on the road. it started on rt61 in coaltownship. they said it was a high speed chase i said i couldnt hear your sirens over the pipe. once i got to a stop sign i noticed it was flickering. i looked back and 3 popo cars were behind me. after all was said and done my license was suspended for 10 years and i got 16 hundred dollars in fines. what my point is, is that i fucked up. i was on the highway, i was on them roads and i`m the dumb ass that stopped.

wheres the beer gunna be?

wheres the ride gunna be?

i`m not sure if i know you or not but i dont think i seen your ride before.

That is nice. good work. the price is a little high but that is nice. it has a clean look to it.

what is the advantages of doing a plug chop? well that top end you just put on could have bin toast if you didnt notice you plug was lean. the advantage is that if your plugs burn the way they should you dont need a new rebuild sooner then expected due to running lean. if your not sure what way to go then go rich. plugs for $2 sounds better then piston/ring/bore/hone and possibly a crank.

If the arms are mint you can get a good price for them but if they are beat up you wont get much. no one wants old arms with worn out ball joints. i dont know if that answered your question or not.

lets try that one more time. i also have a J-arm.

yea thats a good guy bad guy thing. where you from? Coal region?

:thumbsup: thats a good one but i dont think anyone got it. must be a coal thing.

Dont listen to what mdhc500 has to say. his tires suck hahahaha J/K

The stars in your profile. under your pic.

I think they are asshole stars. if you have one your an asshole. 3 would be a semi asshole , 5 stars is not so much of an asshole but still an asshole.

if you want to be safe go up one on the main.

I sold my oem head for $37 with $16 shipping. i would have bin happy with $5 bucks but i did get Bills pipes for $60 the pipes were like new but the silencers were fucked.

wow, i typed the wrong shit. as for whats in the crank i would pull off the cylinders turn the shee on its side and blow as much off that shit out that i could with a air hose. you know what i mean. your tranny is not connected to your crank.

i`ll try to get that cut after work and i`ll get back to you.

your tranny oil is not in the crank so thats all good. as for whats in the tranny i would pull off the cylinders turn the shee on its side and blow as much off that shit out that i could with a air hose. when you put it back togeather you could put the head on the cylinders before you place the cylinders to the block. it easier that way IMO. that way you can watch the O rings to make sure it seals.

man i love them fenders and decal kit. dam that looks good. i would have to cut the fronts but nice ride. she looks good.

after you get it you can just send me what it took to ship it to you. do you want a section of that bar or just a inch or so piece to cut out that mount? i dont know how bad yours looks so i`ll ask and i dont think it matters but what side do you need?

we dont have anything at work to fix it but if you want i can cut it off my old frame and send it.