shee4speed

yeah,I agree with the 310 or 300's. Especially with k&n.I think the perfect jetting kit is for uni and maybe stock box with those silly little 1" filters in the bix.

I like the jetting Guestimate.

I thought you could get +4. How far can you get?

A pick of the RS one or the stock one?

Ricky Stator! Some pople have had troubles but if you do it right,it should be good. And the cheapest!

float height is very crucial. 21 mm from the base of the carb with no gasket. you measure to the top of the float with the carb upside down.Hopefully you dont have any shit stuck in the needle valve seat. You'll get it.Just measure carefully and clean thoroughly.

yeah,just the springs were screwed up. Shees WFO now.

just do yourself a favor,and call Kevin at HJR.My bike will putt or just flat get it.35's PWK by the way. I have the shearer inframes and trails are not a problem.

I'll let you know. The funny thing is, I wooped him bad with stockers.

Thats what I'm talking about! STEELERS :beer:

WOW! what a pita! Glad to here it.

turn the gas on and tap on the bowls with a screwdriver.Sometimes the floats stick.

just found this. I don't know if its been posted before.Click

I'm on it. Thanks brother!

CEL-- middle clip

So did anyone do the mathe and get the big winner? What about playoffs?

thats what I wanted to hear! :biggrin:

Never thought of that.Kavin at HJR said the 35's would be great.He's even put bigger ass carbs on the same setup. :shrug:

Yeah,I'll get this fucker dialed in.My bitch neighbor thinks his YFZ is king and shit.Not for long when I get these carbs dialed in.

I have the 160's on hand and will try them first.If the plugs were fouling would it still run good? It still was very crisp sounding.

I'm pretty sure to get it all out you need to tip the bike on it's side.

I was at Glamis for a week and was doing really well the first day and then the bike stopped pulling like usual.I know I'm running extremely rich,but 4 pukes were keeping up till I hit 5th.That never happened with stock carbs. So I pull my plugs and the fuckers are black as shit. With fouled plugs will it still run good? I've never fouled a plug before. I currently have 165 mains with the 35 PWK's.I'll def.drop them down to 155 or so.

the craftsmanship is fine.Just the rubber gasket is so thick you cant tighten it very much or the gasket will leak. You need to use Yamabond on it and it will be just great.

chiefs sure do suck ass too.

I got ya. I was at the dealer today and they had a used Banshee all built and chromed with drag pipes for $11,900. I couldnt believe it.