adrenaline junky

Im wondering, does anybody know where to get 34mm carbs anywhere for super cheap?

I am about to buy some 34 mm carbs.Does anyone know where to get airfilters that do not need airboxes for cheap?

Do you think that buying this is worth it?rocky mountain atv

If you have a twist throttle cable that is supposed to go in a keihn carb, can you put it in a mikuni carb?

The pegs just have to have no major problems.Thats it.

I am looking for a frame that doesnt have to be in good condition. The front end can be completely thrashed because thats the part I am modifing. Paint can be scratche as much as possible. So basicly, no serious problems with the mid and rear section of the frame.

Bend them both back and forth until you can start to feel and see them starting to brake in. There should start to be creases in certain sides of the boots.

Im pretty sure that it can. But only if its the same size.

thats not deans. But it is his frame. He used to sell his frames for 10k. Ive heard that it handles like a pre runner. It has 16 in of travel.

Check these pictures out. Theres a vid of it thats posted as insane banshee.

Arent those first two pictures pismo? Glamis doesnt have an ocean even close to it.

I think the same thing about fuel injection.They are already putting it in quads even though it is not perfected.And dean sundahl (master of all desert racing banshees) said that he was going to start using fuel injection on his shee.

I think you should go with t5s.If you are going to get t5s, make sure you buy the pro rider kit from toomey.com. Mine runs perfect. Toomey really did a great job on this kit. It comes with a 2:1 high flow airfilter with outerwear pre-filter,(eliminates airbox) perfect jet kit, boyesen power reeds,pipes, silencers, stinger tubes, and a metal clamp for the silicone seals. The only bad thing about this is that you will have to either buy or custom make a coolant bottle bracket. Whole kit costs 700 dollars.

I have a 97 banshee with toomey t5s, airbox eliminator, reeds, and jets. Im going to put a head on it that is milled and shaved just enough to run pump gas. Do I have to change my jetting? If I do, what jetting should I use?

I would go with some 18 paddle sand tires unlimited padla brats. You are probably thinking im crazy but these paddles are totoly awesome. They hook up great while drag racing and while riding in the bolws they can get you going pretty fast. They do not kick up that much dust, but when you get them spinning they will probably throw a 30 foot roost.

I got a asv clutch lever for a 50cc dirtbike. Since theyre univesal they should fit on your girfriends quad. These ones are a lot less breakable because theyre shorter so that when she rolls over it doesnt bend back as much.

Whenever I look for carbs, I always see keihn. Right now I cant afford to blow 400 bucks on my quad before this first riding trip of the season im going on. So I was wondering where to get mikunis

I am primarily riding in the dunes and I was wondering, how many watts for my lights should I get? Iwant to be able to haul through the dunes at night and be able to see decently.

new lights, works shocks, long travel a-arms, ims tank, +4in swingarm, prm baja bumper, etc.

hey, where did you get those kings

I know that he doesnt make frames any more, and hes not the creater of that gas tank. I know that someone still makes em for stock banshee frames. I just dont know where to get them.

Do any of you know where to get the metal gas tank that dean sundahl puts on his banshee?

I wash mine with simple green. Then I polish them with never dull.

Have any of you seen the bumpers dean sundahl puts on his banshees? If you have, im wondering where to get those. I know that that bumper is built for a certain frame that he builds, but there is a bumper that is the same exact design except it fits the stock banshee frame. Do any of you know where to get one?

wow, that's pretty cool. I also saw that on the website you can trade your t2s for new t5s for alittle bit of money.