Jump to content

IROOST1

Members
  • Posts

    404
  • Joined

  • Last visited

Everything posted by IROOST1

  1. No one needs clutch side parts??? make offers
  2. got one, its brand new, i just opened it. but everything is there. $18 shipped.
  3. i need the four black, rubber backed washers that go on the motor before you put it in. The look like the edge is broken on them. And they say up^ on them. They ussually look like shit. But i misplaced mine so i need them.
  4. http://chicago.craigslist.org/wcl/rvs/378618829.html for pics I have some like new banshee tie rods, $20 shipped Left Banshee Carb Float, $make offer Clutch Basket, Gear, Hub, and Pressure plate with springs gear has a bad tooth, basket has least amount of wear i have seen in a long time. $ make offer Shift Shaft, Aok $make offer Kick start gear, clutch plates, everything else off clutch side. $make offer
  5. http://chicago.craigslist.org/wcl/rvs/378613539.html for pics I have some powdercoated hubs, and stock brake lines. the brake lines i will sell for $15 shipped, and the hubs, which were powdercoated poorly, for $20 shipped. obo
  6. You can see pics here http://chicago.craigslist.org/wcl/rvs/378607491.html I have a bunch of wheels and tires i want to get rid of. 1st, Ohtsu front and rear just tires, off 450r 22/7/10 and 20/10/9, very good condition, 0 holes $60 for fronts, $60 for rears 2nd, Banshee, Titan turf tamers, race cut. On douglas polished alum rims 18/9.5/8, 0 holes, Excellent tread $80 3rd, Banshee, Stock gold wheels, full set. With stock dunlop tires 20/10/9 and 21/7/9, 50% tread, 0 holes in fronts, 3/1 patches in rears. $30 fronts, $30 rears 4th, Blaster, stock white wheels. one balding, other ok tread. 21/10/8, a patch in each tire. $15 All wheels are in good condition, they are not new. Shipping is not included. Buyer pays actual shipping + 3.75(for box, each pair) I have more pics(closer), email me for only if serious.
  7. DOESN'T ANYONE HAVE ANY???
  8. i had a 350 and it was piped and had a performance carb and open intake. had tons of power. i would keep the stock motor in it, just mod it. it will be worth a lot more in stock condition. and dont throw any stock part away. they are very valuable.
  9. need all four, will pay paypal.
  10. too much, 40 bucks for that crap is a rip. might as well go to ace and get something similar.
  11. anyone?
  12. they are the ones that look like the edge is broken. anyone
  13. i have seemingly misplaced mine and need 4 so i can FINALLY get my motor back in. let me know what you have. dave
  14. still needed
  15. anyone!
  16. wanted
  17. where in illinois, can you send me pics and more info [email protected]
  18. stockers right. i have the whole set i can send 9$ shipped right to him. [email protected]
  19. Bikes, they are so fun to air out, plus, try and catch me on my yz 250. Quads are good for lazy rides though. Plus, i have the quads since im the only one who has a bike, so its nice to play at their game.
  20. tors removed, i think the float is hoaky. i replaced the needle jet and it still leaks fuel. so im looking for a new float, or right carb.
  21. i got the crank, just need the head now
  22. like it says, i need it to have been working properly. Let me know what you have, i have paypal. I will be on vacation till tue but will try and check in here.
  23. thats exactly what i thought. it doesnt want me to get rid of it. the balance tube is new and on. the jets i can see through every hole. coil tests out good. i think the needle jet is defective. since fuel leaks out, it may be dumping into the motor and causing it to start hard when it sticks. i ordered a new one from dk. so hopefully that fixes it since i have a buyer.
  24. I have a banshee, all rebuilt. I am trying to sell it. It ran perfect all day. this morning, i go to put it out at the street, it doesnt want to start until 10 kicks. i didnt even put it out. so after work, i go to pick it up from my other house to bring it back to work on, starts on first kick. what the hell. One, out of five times i go to ride it, it doesnt want to start. once its running, its perfect. i have done a leak down test, holds 6 psi for 2 hours. tested every electrical component except cdi, perfect. carbs are as clean as they get. new plugs, caps, fresh motor, 130 lbs comp(stock head). the only problem is i put moose rebuild kits in the carbs and the right carb leaks sometimes out of the bowl overflow. the float height is perfect, i think the needle jet might be faulty. I THINK I GIVE UP, ITS GONNA GET PARTED
×
×
  • Create New...