-
Posts
6,684 -
Joined
-
Last visited
-
Days Won
195
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by 375hp banshees
-
-
If it has factory adjustment style no. Most are universally honda style eccentric, not bolt/ stud adj.
-
Did it Work before ?
how did you wire in the DC conversion?
-
10 hours ago, registered user said:
jfc i machined my own head and it dont rattle plugs out. how long that guy been in business ?
Yeah but is your bore... centered
-
3 hours ago, kevshiau said:
Kevin assembled it. The fuel I used was VP C10, I bought it off Kevin when I picked my bike up. I will ask him check what timing plate it is when he adjusts it.
If he can't figure it out this time around I may have to find another builder to get it running properly, another unexpected expense...😩
Did he run it too?
Well that eliminates most every issuse ...except tuning.
Like 97 said , he's had issues in the past ( dome/ squish) .
Work with him ; & 97 ; hopefully its something easily fixed.
-
7 hours ago, specialblend07 said:
He’s good. The sex change went well and he’s started using his dilators.
Sent from my iPhone using TapatalkGood!
I'm proud of him.
Tell'm it aint boat season gtf back in here
-
Speaking of RRL, figured this'd bring him out... hows he doing?
-
^^ U assemble or kevin?
While your in there Make sure you dont have a china timing plate...there #'s are off!
Can Fuel is not oxygenated or anything, is it?
-
* cylinders widened
Just make sure The machine shop is familiar with 2 strokes!
Make sure he uses wiseco piston clearance.
You don't need to change your jetting for that, but make sure you warm it up with wiseco in there... versus What you did with the stock Pistons.
All this, assuming the old pistons look good and you didn't have a jetting issue before. Do a leak down test when you're done!
Define more compression
-
Where are you getting it from?
-
He's from Fl. ...give'm a break
-
Pretty sure its crushed...by now
-
Shots fired, SKEETER u gonna let him talk 'bout u like dat?
Gotta admit ,sounds accurate doe u...🍆😯
-
19 hours ago, pp13bnos said:
I would at least sand blast and spray paint the frame. I don't care if its a mock up setup or not, perception and branding matters to the alot of people.
Yeah, locogato jeezzzz
-
you mean you havent heard of them? Hmmm,mmm
G R A N D
R I V E R
R A C I N G
-
-
Your not gonna find anything from this clown but...
@tfaith08 will
-
Gender neutral pipes
-
8 hours ago, kawa110 said:
.
Shee's on her . ?
-
Fuel cap vent? u put correct bowls on correct carb?
Float level?
Just sprayed or disassembled & sprayed?
-
Define higher idle
I was at 340 stock port with pipes & pod filters @ sealevel so...
Does kicker need to move away from motor or clocked, it will clock some, the splines are fine & will still be lined up with slot. Dont clock it so much, it rubs on clutch housing, when up tho.
-
-
1 hour ago, OMW2FYB said:
Gonna need a name for those
Mef?
...next
-
1 hour ago, OMW2FYB said:
Oh yeah that was a while ago, we sold that out. I can find a pic when i get home from work. Also working on a set that are laser cut out using my cad software. Gonna need a name for those^^SKEETER to the front,^^
SKEETER to the front
-
OE still available for $ 600 iirc
Exhaust choke clearance problem
in Banshee Repairs and Mods
Posted
Upp intakes, clock carbs some, shim pipes...