b33rs

WoW, wouldn't that be nice. He also might be super busy! I called him start of the summer about building a 421cub for me, I needed everything besides the case and he told me to check back in 4-5 months. Took the money and bought another bike Called back again and he told me it would still be another month or two. That was a little less than 2 months ago, so I gave up. But when I did talk to him he was very helpful.

You would think if you spent $17g that you could get a pair of billit headlights with it ::

Not sure if you have looked at it but take a look at the new KTM atv 525 or if you like dirt bike maybe even the KTM 505 :thumbsup:

I run Rockets, never had a problem. love them! :thumbsup:

Could have removed it in the time it took you to post this :smile:

Run it and run the piss out of it :thumbsup:

I have a X-33 axle that I run +2 for general duning, this weekend I bought a set of superlights for a set of 8x8 rims i've had. I'm heading over to dunefest this year and wanted to do some dragging with these tires and I was wondering if I would gain anything going back to the stock length rather than +2 while I'm dragging? thank ya

Not sure if Jeff has time, I talked to him a few months ago about building a cubby for me and he told me to call him back around August or September! So I took the money and bought another bike. I think everyone's busy this time a year but you might have some better luck than me.

We'll be there the 7th and 8th :thumbsup: I ride a (white) banshee with a checker board paint job. My buddy will be on a (red) Honda 450R

Get more POWER! :thumbsup:

Cool thx for the info :thumbsup:

I haven't checked the compression on it, but I'm running 19cc domes.

Right now I'm running a stock motor with a NOSS head and +4 timing. I've always ran 110 since it's easy for me to get. So I was wondering could I go to +6 or 7 for a little more snap or am I just wasting my time? thx :beer:

thx JB :thumbsup:

Time to modify

The rear chain slide the one thats connected to the swingarm, I know the purpose behind it but is there anyone that runs a +6 swingarm without this on. The reason I ask is because I've tried a few different sliders and they seem to have a bad angle when the chain slides threw. And was wondering if I could get away with running it on the dunes without it?

lol :thumbsup:

Ya you can have a CWP in Oregon, Coming up April 22 this year will be 12 years since I've had mine here in Oregon. Back then you had to take a 5 hour class to get the piece of paper to take down to the Sheriff's office. I think you still have to take a class but it's not as long and I still have to go to the Sheriff's office to renew it. Might start with giving them a call, Good luck :thumbsup:

Your first post :yelrotflmao:

Not sure if I can help ya, but I just went with the Durablue X-33 after looking a long time at the aluminum axles. I had a hell of a time trying to find a axle that was stock length or even wider in a aluminum axle. I personaly think they are nice and I'm sure they work well. The X-33 claims at least on RMATV that it weights around 13 or 14 lbs. with a drilled shaft and being able to adjust to +2. Just my 2 cents :thumbsup:

Wouldn't count on it, I spent $1300 in 3 weeks and they gave me nothing! And I even ask everytime I called... but they have pretty cool shit, so spend it and grin :biggrin:

You might be a Redneck if... ::

I'm looking to tie my on/off switch into my turn key switch, so that when I turn the key on I can just kick it and go. Just need to know what colors go where? thx for the help :thumbsup:

I know Cascade sells these, but they are out. If there is anyone that might have them to sell that are next to "NEW" please let me know... here's a link from Cascade of what they look like http://webforce.nwrain.net/founder/cascade...ORE_DEPT_ID=171 thx guys. :thumbsup:

http://www.google.com/ :thumbsup: