LiftdT4R

Called up TCS today, they get 350 for single preload, and 450 for 0 preload, that incluse a full re-build with revalvable parts, and bouble rate eibach springs. Not too bad I think, any thoughs?

Hey, what's up all? Looking for an a-arm frame, preferably a newer one, that is in great shape. No tweaks, bends stuck bolts, or cut mounts. I want something that is going to be almost new. I have cash in hand, so lemme know. I will either need a title, or a hand written receipt, per NJ laws. Hit me up on here, or AIM, my sn is PQJ. Thanks!!!!!

:: Tell me about it, I just tried selling a whole bunch of old shit on there, and I got 3 out 8 bidders that didn't pay. If you part it, between here and planetsand you should be able to get rid of most of it, e-bay the rest. I only got $500 for a complete engine that made 115PSI and ran fine, but I wanted it gone quick. In pieces or whole I think your aound the 800-1000 area. For the rest of the bike, it might be a little tougher. Alot of non-engine parts don't seem to be going for that much. I'd say if you came home with 1600 after all is said and done, it would be a good deal, JMO. Good luck bro, lemme know where you want paypal for the tag bumper.

Payment sent.

Hmmm, not by much, last time I did a rebuild my Actron read 130 even, then after break in, and few months it only read 125, and it's been there ever since.

:yelrotflmao: Thanks everybody!!!! Kept it low key this year, but still didn't skimp on the drinking, I'm feeling it this morning though! :beer:

Thanks guys, good to know, those prices do seem awesome, and I'm glad to hear their service is awesome, I'll probably end up going that route. I tried PMing him a few times, and never got a reply.

Ok, I wanted to keep this project kinda inexpensive, so rather then replace the rear shock, I was going to have it revalved, and the spring PCed. I tried PMing Shane on here, but never heard back from him. Can anyone help me out with this? Any places to hit up? Any info would be appreciated! :beer:

If he takes the bottom end, lemme know if you wanna sell that Hinson setup seperate maybe we can work something out.

Yeah, they went quick, I wanted them.

PM sent!

I wish I had the cash and was close enough.

You shouldnt have to change your jetting with the timing advance or reeds. SOmetimes, but not often the timing advance likes a little fatter main, the bike will run a little hotter, and wants a little more fuel. I've never had it happen to me, but I've heard about it.

I saw that R on bikepics, sweet ass bike especially for 3 gs!

Your from Jersey right? That's a sick project, I was damn tempted tp pick up that RZ engine from bansheecub and throw it in mine. One day I'll definately make the jump, the elctronics and stuff are damne xpensive is they need to be replaced though. Anyway, PM Yaxy, he might know where to find them, I talked to him a lot when I was tryin to decide on what to do, he just built a RZ, and he knows a shitload about them. Good luck bro, Jay

:yelrotflmao: Reminds me of this site: http://www.fedexfurniture.com/pictures.html

I can't say 100% what's going on, but it does take a while for stuff to get to the U.S. especially with customs nowadays. The few times I talked to bansheecub, he was very polite, and seemed very reasonable, just my .02 though.

Same here, I could get a PIMP Ducati for that price, and it would blow everything short of a rocket off the road.

I used mine to catch oil once, I took the drain plug off my Ford, and forgot about the pan to catch the oil, so I used the pipe instead. I chucked th whole stock set in my junk pile out back a few weeks after. You won't be able to get rid of them even for free, completely useless.

Here are parts 2-8, photobucket shrinks the images a little bit, the ones sent in the e-mail were larger, and more readable, not terrible though. http://i38.photobucket.com/albums/e130/JHupp06/HQ2.jpg http://i38.photobucket.com/albums/e130/JHupp06/HQ3.jpg http://i38.photobucket.com/albums/e130/JHupp06/HQ4.jpg http://i38.photobucket.com/albums/e130/JHupp06/HQ5.jpg http://i38.photobucket.com/albums/e130/JHupp06/HQ6.jpg http://i38.photobucket.com/albums/e130/JHupp06/HQ7.jpg http://i38.photobucket.com/albums/e130/JHupp06/HQ8.jpg In my mind, the shee should be the real winner, come on, a 20 year run for an ATV is probably the best ever! Also,the motors were reliable right out of the box, they didn't need to be fixed, and they don't grenade. TORs is the only thing that sucked, but it's easily removable, at least your not trying to rig up cases and shit.

and yes, lee would be the one to talk too

yeah, same here, as long as the design is cool.

http://i38.photobucket.com/albums/e130/JHupp06/HQ1.jpg Hosted Part 1, just wanted to test to see if it was readable, if it is, I'll throw the rest up there.

Awesome guy, don't hesitate to deal with him! Bought an LSR swinger from him, had it the next day. Standup guy!

Got the swinger today! That was damn fast shipping! Thanks man!